Leviton 4980L-VFR Leaflet

A vertical cable management system in a slotted duct 
configuration designed to route cable and mount onto an 
industry standard equipment rack. Two vertical 40" ducts, 
or one 80" duct (comprised of two 40" ducts) span the full 
length of a standard 7-foot equipment rack. The Horizontal 
and Vertical Slotted Ducts come with cable concealing 
covers and an assortment of accessories.

A vertical cable management system in a slotted duct 
configuration for copper and fiber cable systems. The 
management system shall be cULus listed,  PVC rated 
for 94V-0,  ABS rated for UL94HB, and compliant with 
ANSI/TIA/EIA 568-B standards. It shall mount onto an 
industry standard 19" equipment rack. The management 
system shall offer an assortment of accessories including 
a bend-radius compliant cable router to transition cable 
from a horizontal to vertical slotted duct.

•  Versatile solution for fiber/copper cable organization 

  and management
•  Front only and front/rear configurations
•  Cable concealing covers
•  Mount on standard equipment racks with top, bottom, 

  and side cable entry
•  Finger alignment with rack spacing

•  Use on side of rack to route, protect and manage 

  fiber or copper cable
•  Bend-Radius Compliant Cable Router complies with  

  ANSI/TIA/EIA standards, ensuring 1.18" bend radius

STANDARDS COMPLIANCE 

Meets or exceeds all applicable standards: cULus Listed; complies 

with TIA/EIA-568-B; and meets FCC Part 68

Dimensions: 

 

See second page

Materials (channel): 

ABS rated for UL94HB

Materials (cover):  

PVC rated for UL94V-0

• 

Cable Retainer - Mounts on the duct fingers. Cable Retainer  

  is adjustable to slide along the duct finger and includes  

 

  break-away detail to accommodate all duct sizes.
• 

Mounting Bracket Kit - Used to attach a vertical duct to an   

  adjacent equipment rack. Each kit comes with #8 screws.
• 

Bend-Radius Compliant Cable Router - Routes copper    

  or fiber cable from inside the horizontal duct to the vertical    

  duct. Maintains 1.18" bend-radius minimum. 
• 

Cable Retainer - Mounts on the duct fingers. Each Cable    

  Retainer is adjustable to slide along the duct finger and  

 

  includes break-away detail to accommodate all duct sizes. 
• 

Slack Loop Storage Organizer - Stores slack cable and    

  maintains a minimum of 1.18" bend-radius. Designed to be    

  mounted on the duct fingers and it can be adjusted to a  

 

  variety of slack loop sizes.
• 

Duct Cover Hinge - Designed to easily open and close duct   

  cover for increased protection and easy access.
Accessories sold separately

For a copy of Leviton product warranties, visit www.leviton.com.

 

  

2222 - 222nd St. SE  Bothell, WA 98021  Tech Line: 1-800-722-2082  Fax: 1-425-485-9170  www.leviton.com

Copyright © 2008 Leviton Manufacturing Co., Inc.  All rights reserved.  Subject to change without notice.

Page 1 of 2