Philips 40HFL5009D 40HFL5009D/12 User Manual
Product codes
40HFL5009D/12
7 - TEXT
To open or close Text / Teletext.
To open or close Text / Teletext.
3.2
IR sensor
The TV can receive commands from a remote control that uses
IR (infrared) to send commands. If you use such a remote
control, always make sure you point the remote control at the
infrared sensor on the front of the TV.
IR (infrared) to send commands. If you use such a remote
control, always make sure you point the remote control at the
infrared sensor on the front of the TV.
3.3
Batteries
1 - Slide the battery door in the direction shown by the arrow.
2 - Replace the old batteries with 2
type
2 - Replace the old batteries with 2
type
AAA-LR03-1.5V alkaline batteries. Make sure the + and
the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until it clicks.
3 - Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for
a long time.
Safely dispose of your old batteries according to the end of use
directions.
a long time.
Safely dispose of your old batteries according to the end of use
directions.
3.4
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the remote control.
substances such as alcohol, chemicals or household cleaners on
the remote control.
16