Philips 40HFL5009D 40HFL5009D/12 User Manual

Antenna (DVB-T) or Cable (DVB-C) and press OK.
4 - Select the DVB setting you want.
5 - Press 

, repeatedly if necessary, to close the menu.

DVB-C channel installation

 

 

For ease of use, all DVB-C settings are set to automatic.
If your DVB-C provider gave you specific DVB-C values, the
network ID or network frequency, enter these values when the
TV asks for them during installation.
It might be necessary to adjust the scanning (full or quick scan)
or enter a specific symbol rate in the 

Settings menu while

installing. To set a 

Symbol rate, first set the Symbol rate to 

Manual.

Channel number conflicts

 

 

In some countries, different TV channels (broadcasters) might
have the same channel number. While installing, the TV shows
the list with channel number conflicts. You need to select which
TV channel you want to install on a channel number with
multiple TV channels.

DVB-T + DVB-C

 

 

If you can use a DVB-T antenna input but also a DVB-C input,
you can set up your TV for both DVB-T and DVB-C. Install one
system followed by the other with the necessary settings.
Once each system is installed, you need to switch the antenna
input signal on the 

Antenna connection on the back of the TV

and set the TV in the appropriate system to view the installed
channels on TV.
To select the DVB-T or DVB-C setting, see above.

DVB settings

Access DVB settings

1 - Professional Mode: Off 

 Press  and select Setup and

press 

OK.

Professional Mode: On 

 Enter the Professional Home Menu.

2 - Select

 Search for channels and press OK.

3 - Select 

Re-install Channels.

4 - Select the country where you install this TV.
5 - Select 

Cable (DVB-C).

6 - Select 

Start to search channels, or select Settings for DVB-

C settings.
7 - Press 

 , repeatedly if necessary, to close the menu.

Symbol rate mode

If your cable provider did not give you a specific 

symbol rate

value to install the TV channels, leave the 

Symbol rate mode

setting on 

Automatic.

If you received a specific symbol rate value, select 

Manual.

However, the value you received could be in the predefined list
of symbol rates already. Select 

Predefined symbol rates to

check if your value is available automatically.

Predefined symbol rates

With the 

Symbol rate mode set to Automatic, the TV will use 1

of the predefined symbol rates as used by most cable providers
in your country.

Symbol rate

With the 

Symbol rate mode set to Manual, you can enter the

symbol rate value you received from your cable provider. To
enter the value, use the number keys.

Symbol rate 2

With the 

Symbol rate mode set to Manual, you can enter a

second symbol rate value you received from your cable
provider. To enter the value, use the number keys.

Network frequency mode

If you intend to use the fast 

Quick scan method in Frequency

scan to search for channels, select Automatic. The TV will use 1
of the predefined network frequencies (or HC - homing
channel) as used by most cable providers in your country.

If you received a specific network frequency value to search for
channels, select 

Manual.

Network frequency

With the 

Network frequency mode set to Manual, you can

enter the network frequency value received from your cable
provider here. To enter the value, use the number keys.

Frequency scan

Select the method of searching for channels. You can select the
faster 

Quick scan method and use the predefined settings used

by most cable providers in your country.

If this results in having no channels installed or if some channels
are missing, you can select the extended 

Full scan method. This

method will take more time to search for and install channels.

Frequency step size

The TV searches for channels in steps of 

8MHz.

If this results in having no channels installed or if some channels
are missing, you can search in smaller steps of 

1MHz. Using the

1MHz steps will take more time to search for and install
channels.

30