Black Box QCE12U Leaflet

Instructions for Removing a QuietCab Elite

™

Cabinet from a Pallet Using a Forklift Truck

1. Make sure the pallet is placed on a flat, even surface.

Remove the straps and then the sides from the crate
(use a mallet). Leave the bubble-wrapped cabinet on
the pallet.

CAUTION: A forklift must be used by a

trained driver to safely remove the cabinet

from the pallet.

2. To remove the cabinet from the pallet, make sure the

forklift is facing the front or rear of the cabinet (not the
sides). Carefully place forks through the aperture
underneath the frame. Gently lift away from the pallet,
making sure the cabinet is properly balanced on the forks.

CAUTION: Toppling hazard! A person should stand on each

side of the cabinet to help balance it during lifting.

Gently lift away from the pallet, making sure the cabinet
is properly balanced on the forks.

Instructions for Removing a QuietCab Elite Cabinet
from a Pallet without Using a Forklift Truck

1. Make sure the pallet is placed on a flat, even surface.

Remove the straps and then the sides from the crate (use
a mallet). Leave the bubble-wrapped cabinet on the pallet.

2. While the cabinet is still on the pallet, remove the

packaging and bubble wrap. The cabinet is heavy, so
remove the front and rear doors and the side panels.

CAUTION: Make sure the doors and side panels are placed

against a solid wall on a clean, even surface after
removing them from the cabinet.

3. Once all the cladding has been removed, the frame should

be light enough for 2 or 3 people to lift it off the pallet.

NOTE: Place the frame where you want it to remain before

replacing the cladding.

724 -746 -5500 | blackbox.com

BLACK BOX

QCE12U

QCE24U

QCE42U

Inc. Any third-party trademarks appearing in this document are acknowledged to be the property of their respective owners.