Alienware 17 W510416MYWIN8 User Manual

Product codes
W510416MYWIN8
Page of 128
Replacing the Palm Rest    |   
49
Replacing the Palm Rest
 
WARNING:  
Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 
"Before Working Inside Your Computer" on page 11
. After working 
inside your computer, follow the instructions in "After Working Inside 
Your Computer" on page 13
.
For more safety best practices, see the Regulatory Compliance 
home page at dell.com/regulatory_compliance.
Procedure
1
2
Replace the status-light board. See "Replacing the Status-Light Board" on page 62.
3
4
5
Connect the status-light board cable to the media-card reader.
6
Align the palm-rest assembly over the computer base and snap the palm-rest 
assembly into place.
7
Close the display and turn the computer over.
8
Replace the screws that secure the palm-rest assembly to the computer base.
9
Connect the keyboard daughter-card cable to the system board and press down on 
the latch to secure the cable.
Postrequisites
1
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on 
page 30.
2
3
4
5
book.book  Page 49  Friday, June 28, 2013  3:27 PM