Seagate STCU100 Leaflet

Seagate

NAS 2-bay

Seagate NAS 4-bay

Networking

Single Gigabit Network interface

Dual Gigabit Network interface

Jumbo frame

Failover and link aggregation

DHCP and static IP

Jumbo frame

IPv4/IPv6

DHCP and static IP

Dynamic DNS

IPv4/IPv6
Dynamic DNS

iSCSI Block

Storage

iSCSI target

CHAP authentication

10 LUN/10 targets

32 LUN/32 targets

External

Ports

2 x USB 3.0 Ports

1 x 10/100/1000 Base-TX

2 x 10/100/1000 Base-TX

HDD Support

2 x SATA II channels

4 x SATA II channels

Hot swappable HDD trays

Support of 2.5- and 3.5-inch HDD

Diskless: Supported HDDs, see Hard Drive Compatibility List

Preconfigured model built with Seagate 3.5-inch NAS HDD drives

Raid and

Data

Management

SimplyRAID

™

(default)

SimplyRAID (default)

- Auto RAID migration, volume expansion, and HDD mix and match

Standard RAID

- JBOD

- RAID 0, 1

Volume encryption

- RAID 5, RAID 5 w/hot spare (for 3 and more HDD configurations)

Rescue mode for volume recovery

- RAID 6 (for 3 and more HDD configurations)

Network recycle bin

- RAID 10
Volume encryption
Rescue mode for volume recovery
Network recycle bin

Power

External PSU, 12V/48W, 100 ~ 240V AC, 50/60 Hz

External PSU,19V/ 90W, 100 ~ 240V AC, 50/60Hz

Scheduled power on/off

Power-saving mode w/disk spin-down

Wake-on-LAN (WOL)

Auto power-on after power outage

UPS support for graceful shutdown (USB and network via SNMP)

Power Consumption (w/2 x 2TB HDD):

Power Consumption (w/4 x 2TB HDD):

- Operation mode: 16W

- Operation mode: 32W

- Power-saving mode: 7W

- Power-saving mode: 13W

- WOL mode: 0.55W

- WOL mode: 0.95W

Physical

Dimensions (mm/in): 170/6.69 H x 120/4.72 W x 218/8.58 D

Dimensions (mm/in): 170/6.69 H x 174/6.85 W x 218/8.58 D

Weight, without HDD (kg/lb): 1.750/3.86

Weight, without HDD (kg/lb): 2.450/5.40

Temperature, Operating (°C): 0 to 40

Temperature, Nonoperating (°C): –40 to 65

Relative Humidity, Operating/Nonoperating (non-condensing, %): 0 to 80/0 to 95

Technical Specifications