Gefen EXT-DVI-1CAT5-ELR Leaflet
Extend DVI up to 495 feet (150 meters) over one
CAT-5e cable
The DVI ELR Extender over one CAT5 allows the extension of a DVI
source to a display, up to 495 feet (150 meters), using a single
CAT-5e cable. This product is capable of HDCP and HPD
pass-through. It can also be configured by the installer via DIP
switches for maximum range or maximum bandwidth, and for low
power consumption (auto sleep mode) or always-on operation.
The DVI Extender over one CAT5 uses Gefen’s ELR
implementation of HDBaseT® technology, allowing the DVI signal
to travel along a single CAT-5e or better cable, reducing cable
costs and facilitating installation.
source to a display, up to 495 feet (150 meters), using a single
CAT-5e cable. This product is capable of HDCP and HPD
pass-through. It can also be configured by the installer via DIP
switches for maximum range or maximum bandwidth, and for low
power consumption (auto sleep mode) or always-on operation.
The DVI Extender over one CAT5 uses Gefen’s ELR
implementation of HDBaseT® technology, allowing the DVI signal
to travel along a single CAT-5e or better cable, reducing cable
costs and facilitating installation.
How It Works
Use the included DVI cable to connect the computer or other DVI
source to the Sender unit. Connect the Receiver unit to a Hi-Def
display with a DVI cable. Use up to 495 feet (150m) of CAT-5e
cable to connect the Sender to the Receiver unit. Configure DIP
switches as necessary. Connect the included locking power
supplies to the Sender and the Receiver units and plug the power
supplies to available electrical outlets. Power on all connected
equipment.
source to the Sender unit. Connect the Receiver unit to a Hi-Def
display with a DVI cable. Use up to 495 feet (150m) of CAT-5e
cable to connect the Sender to the Receiver unit. Configure DIP
switches as necessary. Connect the included locking power
supplies to the Sender and the Receiver units and plug the power
supplies to available electrical outlets. Power on all connected
equipment.
Features*
• Extends DVI up to 495 feet (150 meters) over one CAT-5e cable
• Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
• EDID management for rapid integration of source and display
• Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
• EDID management for rapid integration of source and display
• Enable/Disable switches for HPD pass-through
• Power-Save (Green Mode) selector switch
• 150m/100m range selector switch configures the extender for maximum
range (150 meters) or maximum bandwidth
• Power-Save (Green Mode) selector switch
• 150m/100m range selector switch configures the extender for maximum
range (150 meters) or maximum bandwidth
• Locking power supplies
• Surface-mountable
• Surface-mountable
Specifications*
• Maximum Pixel Clock: 165 MHz
• Video Input Connector (Sender): (1) DVI-I, 29-pin, female (digital only)
• Video Output Connector (Receiver): (1) DVI-I, 29-pin, female (digital only)
• Link Connector (Sender/Receiver): (1) RJ-45
• Video Input Connector (Sender): (1) DVI-I, 29-pin, female (digital only)
• Video Output Connector (Receiver): (1) DVI-I, 29-pin, female (digital only)
• Link Connector (Sender/Receiver): (1) RJ-45
• Internal/External EDID Selector (Sender): (1) DIP switch
• HPD Pass-Through Selector (Sender): (1) DIP switch
• Power-Save Selector (Sender/Receiver): (1) DIP switch
• 150m/100m Range Selector (Sender/Receiver): (1) DIP switch
• Power Indicator (Sender/Receiver): (1) LED, blue
• Link Indicator (Sender/Receiver): (1) LED, green
• HPD Pass-Through Selector (Sender): (1) DIP switch
• Power-Save Selector (Sender/Receiver): (1) DIP switch
• 150m/100m Range Selector (Sender/Receiver): (1) DIP switch
• Power Indicator (Sender/Receiver): (1) LED, blue
• Link Indicator (Sender/Receiver): (1) LED, green
• Power Supply (Sender/Receiver): 5V DC
• Power Consumption (Sender/Receiver): 10 W per unit maximum
• Operating Temperature: 0 to +45°C
• Operating Humidity: 0 to 90% RH, non-condensing
• Dimensions (W x H x D): 4.3" x 1" x 3.4" (110mm x 26mm x 86mm)
• Shipping Weight: 3 lbs (1.4 kg)
• Power Consumption (Sender/Receiver): 10 W per unit maximum
• Operating Temperature: 0 to +45°C
• Operating Humidity: 0 to 90% RH, non-condensing
• Dimensions (W x H x D): 4.3" x 1" x 3.4" (110mm x 26mm x 86mm)
• Shipping Weight: 3 lbs (1.4 kg)
EXT-DVI-1CAT5-ELR
DVI ELR Extender over one CAT-5 up to 150 meters
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
www.gefen.com
* Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners
Copyright © 2013 Gefen LLC
A1
1080P