Cablecon F-Connector F-56 3.9 Self-Install 99909646 Leaflet
Product codes
99909646
Corning Cabelcon ApS, Industriparken 10, DK-4760 Vordingborg, Denmark.
Tel: +45 55 98 55 99 Fax: +45 55 98 55 04 cabelcon@cabelcon.dk
www.cabelcon.dk
Corning
Cabelcon
Cabelcon
Self-Install ™ with finger friendly nut
The perfect choice for Do-It-Yourself and professional
installations – no special tools required!
The next generation of Cabelcon Self-Install™ is a unique quality product
developed for replacement of low quality screw-on connectors - often used
developed for replacement of low quality screw-on connectors - often used
for home installations. Installation is easy, simple and more precise than
ever before.
Self-Install™ is easy to push on – but impossible to pull off. The connector is
automatically fastening to the cable as the connector is installed. It remains
fastened – also after dismounting from the unit.
Technical Data (Typical)
Operational to 3 GHz
Impedance 75 Ohm
Shielding Eff. 30-862 MHz 110 dB
Shielding Eff. 30-862 MHz 110 dB
Shielding Eff. 862-3000 MHz 90 dB
Transfer Impedance 5-1000 MHz <5 mOhm
Transfer Impedance 5-1000 MHz <5 mOhm
Return loss@1000 MHz (typ) 37 dB
Return loss@3000 MHz (typ) 28 dB
IMD (3
IMD (3
rd
order@2x100mW) -120dBc
IMD (IP3 value)
+80 dBm
AMP rating cable data
Max. Tensile strength (overall) 200 N
Detailed datasheets available on request
Ordering information
F-59 3.9 Self-Install Nitin 99909646
F-56 4.9 Self-Install Nitin 99909643-01
F-56 4.9 Self-Install Nitin 99909643-01
F-56 4.9W Self-Install Nitin 99909647-01
F-56 4.9 Q Self-Install Nitin 99909645-01
F-56 4.9 Q Self-Install Nitin 99909645-01
F-56 5.1 Self-Install Nitin 99909644-01
F-56 5.1W Self-Install Nitin 99909648-01
F-56 5.1W Self-Install Nitin 99909648-01
(W=Waterproof)
Installation
1) Strip the cable (6.5/6.5 mm) and pull back the braid.
2) Press the connector over the cable until the dielectric is
flush with the post interface. Pull back the cable.
flush with the post interface. Pull back the cable.
3) Mount the connector/cable on the set-top box – and tighten
with a standard 11 mm/or adjustable hex wrench. Ready!
with a standard 11 mm/or adjustable hex wrench. Ready!
Operational to 3 GHz
Waterproof versions available*
Easy and safe installation in seconds
One-piece connectors – no loose parts
No compression or special tools needed
Plated with our unique Nitin-6™ plating
Unique Self-Install™ compression system
Professional quality and excellent performance
Simple instructions – can be installed by anyone
Fits many standard RG6/59 cables (3.9+4.9+5.1+4.9 Q)
*
*
An external rubber ring for interface sealing is strongly
recommended. Read more on next page.
1
2
3
1
6.5 mm / 6.5 mm
Use the Self-Install™ for
CATV, satellite receivers,
CATV, satellite receivers,
cable modems and other set-
top box applications. The
top box applications. The
waterproof versions can be
used for any outdoor
used for any outdoor
application such as parabolic
dishes etc.
Rev. 171110