DELL Cisco 3130X 210-41304 User Manual
Product codes
210-41304
Cables
TwinGig
Converter
(supports
2 x 1Gb SFP)
Two TwinGig
converters ship
by default in
each switch
module
•
GbE SFP RJ45 converter, Copper
Cisco Catalyst Blade Switches
CAT 5
10GBASE-
CX4 X2
Module
(for 3130X)
CX4 cable, IB 4x connector
CAT5
Cable
10GBASE-SR
X2 Module
or
10GBASE-LRM
X2 Module
(3130X only)
3130X Modules
MMF, dual SC
connector
GbE ports (all models)
Software Upgrades
IP Services Upgrade Available
IP Services Upgrade Available
29
•
GbE SFP, LC connector, SWL (multimode)
•
GbE SFP, LC connector, LWL (single mode)
Cisco SFP Modules
Fibre
OneX SFP+
Converter
Module
CVR-X2-SFP10G
Not sold by Dell –
purchase elsewhere
Cisco Direct Attach
(Twin-ax copper)
1m: SFP-H10GB-CU1M=
3m: SFP-H10GB-CU3M=
5m: SFP-H10GB-CU5M=
(Twin-ax copper)
1m: SFP-H10GB-CU1M=
3m: SFP-H10GB-CU3M=
5m: SFP-H10GB-CU5M=
SFP+ Optical:
Cisco SR SFP+
(SFP-10G-SR=)
(SFP-10G-SR=)
Fibre
Copper
SFP+
Stacking Ports (supported on 3130G & 3130X models ONLY)
2x 64Gb StackWise Ports
(0.5m, 1m, 3m cables purchased separately for factory-installed blade switch)
Designed for I/O bays
A
1
/A
2
B
1
/B
2
C
1
/C
2
A1
A2
B1
B2
C1
C2
1/10GbE
Dell M-Series Blade I/O Guide
Secondary
Management
Serial Port
Works with all 1Gb
Mezzanine cards and LOMs.
Functions with all 10Gb
Mezzanine cards and Select
Network Adapters
Mezzanine cards and LOMs.
Functions with all 10Gb
Mezzanine cards and Select
Network Adapters
with the
exception of the Qlogic
8242-k, 8262-k, and
Brocade BR1741M-k.
8242-k, 8262-k, and
Brocade BR1741M-k.
Quad port GbE Mezzanine
cards or LOMs will function
and are fully supported with
this IO module. In such
configurations, only half of
the card’s ports will be used
since the switch only has
one internal port per
adapter.
Adapters
More details in
Adapter Portfolio section