Cablecon F-Con F-56 5.1 Self-Install 99909644-01 Leaflet

 
 
 

 
 

Corning  Cabelcon ApS,  Industriparken 10,  DK-4760 Vordingborg,  Denmark.

Tel: +45 55 98 55 99   Fax: +45 55 98 55 04       cabelcon@cabelcon.dk  

www.cabelcon.dk  

      Self-Install ™ with finger friendly nut

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
 

The perfect choice for Do-It-Yourself and professional 

installations – no special tools required!

The next generation of Cabelcon Self-Install™ is a unique quality product 
developed for replacement of low quality screw-on connectors - often used 

for home installations.  Installation is easy, simple and more precise than

ever before.   
 

Self-Install™ is easy to push on – but impossible to pull off. The connector is 

automatically fastening to the cable as the connector is installed. It remains 

fastened – also after dismounting from the unit.  

Technical Data (Typical) 

 
Operational to 3 GHz 

Impedance                                                 75 Ohm 
Shielding Eff. 30-862 MHz                      110 dB 

Shielding Eff. 862-3000 MHz                   90 dB 
Transfer Impedance 5-1000 MHz   <5 mOhm 

Return loss@1000 MHz (typ)                   37 dB     

Return loss@3000 MHz (typ)                   28 dB 
IMD (3

rd

 order@2x100mW)                 -120dBc 

IMD (IP3 value) 

          +80 dBm 

AMP rating                                            cable data      

Max.  Tensile strength (overall)              200 N 
  

Detailed datasheets available on request

Ordering information 

F-59 3.9      Self-Install Nitin       99909646 
F-56 4.9      Self-Install Nitin       99909643-01 

F-56 4.9W  Self-Install Nitin       99909647-01 
F-56 4.9 Q  Self-Install Nitin       99909645-01 

F-56 5.1      Self-Install Nitin       99909644-01 
F-56 5.1W  Self-Install Nitin       99909648-01 

(W=Waterproof) 

1) Strip the cable (6.5/6.5 mm) and pull back the braid. 
 

2) Press the connector over the cable until the dielectric is  
     flush with the post interface. Pull back the cable. 

 

3) Mount the connector/cable on the set-top box – and tighten 
     with a standard 11 mm/or adjustable hex wrench. Ready!

 

 

 

 Operational to 3 GHz  

 

 

 

 

 

 

 

 

 

1 

2 

3

1 

6.5 mm / 6.5 mm

Rev. 171110