NEXT UPS Systems Logix 10000 77105 Leaflet

10

O n l i n e   U P S

A true double conversion UPS will provide clean, high level quality 
power to fully protect mission-critical devices such as sensitive 
networks, small computer centers, servers, telecom applications, 
as well as for industrial applications.

Compared to the online UPSs in the current market, Logix series 
provides better output power factor up to 0.8. It offers higher 
performance and efficiency for critical applications. 

Logix can still provide stable power to connected devices under 
unstable power environments. 

With programmable power 
management outlets, users can easily 
and independently control load 
segments.  During power failure, this  
feature enables users to extend battery 
time to mission-critical devices by 
shutting down the non-critical devices. 

Lock output frequency at 50Hz or 60Hz to suit power sensitive 
equipments.

Offers efficiency as high as 97% to cut energy usage & cost.  UPS 
power application via static bypass, timely returning to online 
double conversion when the need arises. 

This feature can secure the personnel and equipment in case of 
fires or other emergencies. 

This feature allows either USB or RS-232 communication port to 
work with SNMP interface simultaneously. 

A DSP controller provides an improved and cost-effective 
solution with high performance.

. Logix 1-3kVA series is equipped with 2-stage charger design 

to guarantee battery discharge time. Besides, it will adjust 
charging voltage according to outside temperature. This 
features will extend the useful service life of batteries.

. Logix 6kVA and up models are equipped with 3-stage 

extendable charger for optimized battery performance. 
This feature extends the useful service life of batteries and 
optimizes battery recharge time. Besides, the extendable 
charger design can be stacked in numbers for large-capacity 
battery charging.

Internal bypass assures continuous power to critical devices 
during UPS maintenance.

For genuinely redundant power protection, Logix (6kVA and up 

models) can either be used in parallel operation with up to 3 

units or hot standby mode. Slave UPS will back up the load in the 

event of critical component failure. It increases power safety and 

availability.

Logix (6kVA and up models) can still normal operate well with only 
18 or 19 internal batteries. 

With built-in isolation 
transformer,  the UPS will 
offer full isolation and 
complete common mode 
noise rejection for connected 
precious equipment. It 
become an ideal power 
source with 100% protection 
against unexpected AC power 
problems.

Logix with built-in 

isolation transformer

NEXT products — standard 

NEXT products — standard