Cablecon Cable stripper ''Pocket installer'' 98501040 Leaflet

 
 
 

 
 

Self-Install™ in two sizes – 4.9 and 5.1

Proper tightening with the Pocket 

installer

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
 

 
Installation is easy, simple and more precise than ever before.  Strip 
the cable and push on the connector – it’s as simple as that. The 
Cabelcon Self-Install™ connector is automatically fastening to the 
cable without a compression tool.  And you can’t get it off!  The typical 
pull strength is better than cable specification. 
 

 
Self-Install™ is also for the professional installer. Both electrical and 
mechanical connector performance is up to the professional 
standards. Self-Install™ is available both for indoor and outdoor 
applications. 
 

 
The waterproof Self-Install™ is equipped with two EPDM O-rings – one 
in the body part and one placed behind the nut to prevent moisture 
intrusion. However, to make sure that the connection is completely 
waterproof from the interface – we strongly recommend installing an 

external rubber sealing ring.  

-  is the perfect companion to go with a couple of Self-Install™
connectors for home installations. The pocket installer combines 
a RG6/59 cable stripper with mechanical stop for proper 
stripping length and an 11 mm spanner. The Pocket installer 
makes the cable preparation much easier and precise, while the 

spanner can be used for proper tightening. 

Ordering information 

 
Cable Stripper RG6/59 

w/ hex 11 Spanner          

98501040 

Seal ring for F-connectors     99900902 
Seal ring for F-connectors     99900912   

Computer controlled test of 

the pull strength

 

External rubber sealing 
mounted on Self-Install™