Bosch CRS-CP-MD-TA F.01U.140.036 User Manual
Product codes
F.01U.140.036
Care Solutions | Social Alarm ManDown Sensor
Social Alarm ManDown Sensor
www.boschsecurity.com
u
Easy to use and to trigger
u
Automatic trigger via position sensor
u
Mercury-free components
u
Battery monitoring
u
Acoustical pre-alarm
The ManDown Sensor has a built-in tilt device, which
can detect if the person holding it is in a horizontal po-
sition, such as lying on the floor. The sensor will auto-
matically send an alarm when its position corresponds
to horizontality after a certain time. Pressing its cen-
tral red button will activate a help call at any time.
The ManDown Sensor can be held, for example, as a
necklace by an elderly person or as a safety device by
a lone worker in a hazardous environment.
The ManDown Sensor will be part of a social alarm
system. It can be associated with a Carephone receiv-
er and linked to a social alarm call center through the
telephone line.
can detect if the person holding it is in a horizontal po-
sition, such as lying on the floor. The sensor will auto-
matically send an alarm when its position corresponds
to horizontality after a certain time. Pressing its cen-
tral red button will activate a help call at any time.
The ManDown Sensor can be held, for example, as a
necklace by an elderly person or as a safety device by
a lone worker in a hazardous environment.
The ManDown Sensor will be part of a social alarm
system. It can be associated with a Carephone receiv-
er and linked to a social alarm call center through the
telephone line.
Functions
Compatibility
The different types of ManDown Sensors should al-
ways be associated with a corresponding social alarm
system, according to the following table.
ways be associated with a corresponding social alarm
system, according to the following table.
ManDown 869 MHz,
Bosch RF protocol
Carephones 3050, 3100, 50,
52, 52+
ManDown 869 MHz,
TeleAlarm protocol
Carephones 10, 12
Detection
Detection by the ManDown Sensor can be decom-
posed into two periods of time.
1) Tilt Detection
When the sensor detects a tilt of more than 60 de-
grees, it will start its internal chronometer for approxi-
mately ten seconds. If the sensor comes back to a ver-
tical position within these ten seconds, the chronome-
ter is reset.
2) Pre-Alarm
If the sensor does not come back to a vertical position
within ten seconds, a pre-alarm starts, accompanied
by a beeping sound. This period of time is factory-set
and lasts approximately thirty seconds. The pre-alarm
is cancelled if the sensor comes back to a vertical po-
sition or if the help call button is pressed.
posed into two periods of time.
1) Tilt Detection
When the sensor detects a tilt of more than 60 de-
grees, it will start its internal chronometer for approxi-
mately ten seconds. If the sensor comes back to a ver-
tical position within these ten seconds, the chronome-
ter is reset.
2) Pre-Alarm
If the sensor does not come back to a vertical position
within ten seconds, a pre-alarm starts, accompanied
by a beeping sound. This period of time is factory-set
and lasts approximately thirty seconds. The pre-alarm
is cancelled if the sensor comes back to a vertical po-
sition or if the help call button is pressed.
Help call button
Pressing the central red button of the ManDown Sen-
sor will activate a help call at any time. During all help
calls made by pressing the button, the sensor will al-
ways issue a beeping sound.
sor will activate a help call at any time. During all help
calls made by pressing the button, the sensor will al-
ways issue a beeping sound.
Optical indication by a LED indicator
The ManDown Sensor can be delivered with an opera-
tional frequency of 869 MHz. It is equipped with a LED
indicator that will flash every ten seconds to show that
tional frequency of 869 MHz. It is equipped with a LED
indicator that will flash every ten seconds to show that