Panduit FLCSMC6EIY Leaflet

LC OptiCam

Connectors

Factory pre-polished fiber

Eliminates inconsistent and time-consuming field polishing to deliver

stub endface

required optical performance; reduces termination time (less than
half the time of field polish connectors) and the number of
installation tools required

Dual cam design with

Secures both the fiber and the buffer during the camming step to

fiber and buffer clamps

facilitate consistent termination results; reduces the termination time
compared to conventional termination methods

Allows up to two re-terminations to achieve optimum termination
results; reduces the number of rejected connectors and terminations
to provide yield rates approaching 100% for lower installed costs

Translucent

Facilitates inspection of the fiber termination quality; results in rapid

housing assembly

installations, improved termination yields, and lower installed costs

Non-optical disconnect

Maintains data transmission under tensile loads for jacketed cable

Mechanical cable retention Consistently provides higher than industry standard cable retention;

requires no adhesive, speeding installation

Zirconia ceramic ferrules

Provide the highest durability for repeated matings

OptiCam

Termination Tool

Universal termination tool

Secures both fiber and buffer in one action for all OptiCam

Connectors with connector specific cradles (included); ensures
fast, consistent, and optimal terminations

Integrated visual

Offers visual indication of proper termination after the cam step

termination indicator (VTI) has been completed; virtually eliminates operator error to deliver

a lower installed cost

w w w. p a n d u i t . c o m

Standards requirements:

TIA/EIA-604 FOCIS-10 compatible; exceeds
TIA/EIA-568-B.3 requirements

Fiber compatibility:

62.5/125µm OM1, 50/125µm OM2, 10Gig

™

50/125µm

laser optimized OM3/OM4 and 9/125µm OS1/OS2

Fiber cable type:

900µm tight-buffered cable only

Fiber cable size:

1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots

Ferrule type:

Zirconia ceramic with a pre-polished fiber stub

Insertion loss:

Ceramic: 0.3dB average (multimode and singlemode)

Return loss:

Ceramic: >20dB (multimode), >26dB (10Gig

™

multimode),

>50dB (singlemode)

k e y f e a t u r e s a n d b e n e f i t s

a p p l i c a t i o n s

t e c h n i c a l i n f o r m a t i o n

s p e c i f i c a t i o n s

LC fiber optic connectors are widely used in fiber
optic backbone and horizontal applications for
high-speed data transmission. Typical
applications for LC OptiCam

Connectors

include maintenance or emergency restoration of
fiber networks and retrofit/initial install in both
behind-the-wall (BTW) and in the permanent side
of panelized interconnect and cross-connect.

LC OptiCam

Connectors eliminate the need for

end face polishing and adhesive providing easier,
faster installation, especially in remote areas
and confined spaces. The hand-held OptiCam

Termination Tool gives installers the flexibility
to terminate in very close proximity to the
application without having to switch tools
or find benchtop space.

LC OptiCam

Pre-Polished Fiber Optic Connectors

LC small form factor (SFF) pre-polished connectors with rear pivot
latch shall be TIA/EIA-604 FOCIS-10 compatible and contain a
factory-terminated fiber, eliminating field polishing and adhesive.
LC pre-polished connectors shall have an average insertion loss
of 0.3dB per mated pair for multimode and singlemode fiber.
LC pre-polished connectors shall captivate fiber and buffer in one
action allowing for up to two re-terminations with no degradation
in performance.

LC OptiCam

Pre-Polished Connectors

with Zirconia Ceramic Ferrules

10Gig

™

50/125µm (laser

optimized) simplex:

FLCSMCXAQY

▲

10Gig

™

50/125µm (laser

optimized) duplex:

FLCDMCXAQY

50/125µm simplex:

FLCSMC5BLY

▲

50/125µm duplex:

FLCDMC5BLY

62.5/125µm simplex:

FLCSMC6BLY

▲

62.5/125µm duplex:

FLCDMC6BLY

9/125µm simplex:

FLCSSCBUY

▲

9/125µm duplex:

FLCDSCBUY

OptiCam

1.6/2.0mm Boots

10Gig

™

multimode (aqua):

FMCBT2AQ-X*

Multimode (black):

FMCBT2BL-X

Singlemode (blue):

FSCBT2BU-X

OptiCam

3.0mm Boots

10Gig

™

multimode (aqua):

FMCBT3AQ-X*

Multimode (black):

FMCBT3BL-X

Singlemode (blue):

FSCBT3BU-X

*X = Bag of 10 Boots; 100 per carton.

OptiCam

Termination Tooling

OptiCam

Termination Kit:

FCAMKIT

OptiCam

Conversion Kit

(upgrades Opti-Crimp

Kit to also terminate
OptiCam

Connectors):

FPPKIT-CVY

Field Polish Kit Upgrade
(upgrades Field Polish
Kit to also terminate
OptiCam

Connectors):

FIELDKITUPG

LC cradles (2 per pkg.):

FLCC

LC Fiber Optic Adapters

10Gig

™

multimode:

FADJLCAQ-L*

Multimode:

FADJLCEI-L

Singlemode:

FADJLCZBU-L

*L = Bag of 50 adapters; 100 per carton.

Mini-Com

LC Adapter Modules

10Gig

™

multimode:

CMDJAQLC**

Multimode:

CMDJEILC**

Singlemode:

CMDJLCZBU

**Substitute for module color: EI = Electric Ivory,
BU = Blue, BL = Black, IW = Off White,
AW = Arctic White

Opticom

LC Fiber Adapter Panels

6 duplex MM adapters:

FAP6WEIDLC

6 duplex SM adapters:

FAP6WBUDLCZ

12 duplex MM adapters:

FAP12WEIDLC

12 simplex SM adapters:

FAP12WBULCZ

Opti-Core

LC Patch Cords

Duplex LC to LC:

F^E10-10M‡Y

Simplex LC to LC:

F^F10-10M‡Y

Duplex SC to LC:

F^E3-10M‡Y

Simplex SC to LC:

F^F3-10M‡Y

LC Lock-in Duplex Clip

LC lock-in duplex clip:

FLCCLIW-X

▲

Add -C to simplex connector part numbers

for bulk packs of 100 connectors.
^Substitute for fiber type: 6 = 62.5/125µm OM1,
5 = 50/125µm OM2, X = 10Gig

™

50/125µm

OM3/OM4 or 9 = 9/125µm OS1/OS2.

‡Substitute for length in meters: 1, 2, 3, 5 or 10.

Contact Customer Service for other available lengths.

SPECIFICATION SHEET