Innovaphone 03-00010-002 User Manual

The innovaphone gateways form

the interface to other networks and at
the same time, they provide the hard-
ware platform for the innovaphone
PBX software. All gateways are very
robust. The hardware has no hard
disks or fans. Thanks to the generous
design of the components and the le-
an software structures, innovaphone
gateways are extremely powerful
even when they are fulfilling PBX
tasks in parallel. The stability of the gateways is reflected in the
brushed stainless steel housing.

There are two series in the gateway range. The series that

has a model number ending with 10 has a higher memory ca-
pacity and more powerful processor than the other gateways.
Sufficient processing power dimension is guaranteed by a
Dual Core processor, each with 800 MHz. The various gate-
ways differ according to the type and number of interfaces,
which can be activated as necessary using licenses. Several
gateways can be joined together in larger installations. The
new product line can be recognised by the number 10 at the
end of the model number. 

These new high-performance gateways with the number 10

at the end of the model number are capable of providing the
innovaphone Linux application platform. Additional applicati-
ons, which run on the Linux operating system, can be instal-
led directly on the gateway and can also use the memory on
the Compact Flash card. Therefore, the innovaphone Repor-
ting software can also be installed either directly on one of this
series’ gateways or on a separate server. 

The IP1060 is a pure media gate-

way with two PRI interfaces, which
can, as usual, be licensed individual-
ly. The innovaphone PBX cannot be
operated on the IP1060; neither can it
be used as an application platform.
The IP1060 is especially interesting
when used with the innovaphone Vir-
tual Appliance (IPVA) – if the innova-
phone PBX is installed in a VMware
environment, yet an ISDN connection

still needs to be used. Of course, any other innovaphone gate-
way could be used for this too.

The IP0010 gateway is particularly suitable for scenarios

where the innovaphone PBX is to run on the robust and lean
innovaphone hardware without needing any ISDN connecti-
ons, such as in a pure SIP environment or if additional DSP
channels are needed for conferences.

The IP305 and IP800 are smaller gateways for PBX instal-

lations with ISDN basic rate interfaces to the trunk line and are
extremely well suited for smaller PBX installations or for inter-
connecting branch offices and smaller representative offices
with a "local break-out" to the trunk line.

The IP302 gateway has an ISDN interface to the trunk line

and two analogue interfaces for internal terminals. This is the
only gateway which has all the interface licenses included in
delivery. This makes it especially suitable for quick installati-
ons in small offices or branch offices.

1

2

19" rack for up to 2 devices
Order no.: 01-00999-001

PoE injector for all products
Order no.: 03-00010-228

3

Power supply for IP305 and
IP302
Order no.: 03-00010-226

1

2

3

PRI order no.: 01-00500-003

BRI order no.: 01-00500-002

DSP order no.: 01-00500-004