Innodisk mSATA 3ME DEMSR-A28D06SC2QC Data Sheet
Product codes
DEMSR-A28D06SC2QC
www.Innodisk.com
Datasheet
mSATA
3ME
series
- SATA 6Gb/s interface
- iSMART disk health monitoring
- Intelligent error recovery system
- Excellent data transfer speed
- Write protection security
- Zero mechanical interference
- Anti-vibration mechanical design
- JEDEC standard MO-300 dimension
Introduction
Innodisk mSATA 3ME is designed as the standard Mini PCIe form factor with SATA interface,
and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers
to the MO-300 specification which established by JEDEC. Regarding of mechanical
interference, Innodisk mSATA 3ME absolutely replaces the traditional hard disk and makes
personal computer, in any field, smaller and easier.
and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers
to the MO-300 specification which established by JEDEC. Regarding of mechanical
interference, Innodisk mSATA 3ME absolutely replaces the traditional hard disk and makes
personal computer, in any field, smaller and easier.
Innodisk mSATA 3ME effectively reduces the booting time of operation system and the power
consumption is less than hard disk drive (HDD), and complies with ATA protocol, no
additional drives are required, and can be configured as a boot device or data storage device.
consumption is less than hard disk drive (HDD), and complies with ATA protocol, no
additional drives are required, and can be configured as a boot device or data storage device.