KanexPro HD25FTCL314 Leaflet

ABOUT KANEXPRO

KanexPro carries a broad selection of A/V connectivity products by leveraging the core strength in professional systems enabling you to broadcast, convert, extend, split, or 
multiply HD signal transmissions; simply and cost-effectively. KanexPro is a trademark. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing, LLC in the United States and/or other countries. All other product or service names are the property of their respective owners.

1405 Pioneer St., Brea, CA 92821
888.975.1368  info@kanexpro.com

• High Speed HDMI cables with Ethernet
• CL3 Rated for In-Wall Installation
• Supports 3D and 4Kx2K
• Compatible with prior versions of HDMI and DVI
• Data rates up to 10.2 Gbps
• Support color depths to 48-bits
• HDCP compliant

Standards: High speed HDMI cable with Ethernet
Data rates: Up to 10.2 Gbps
Color Depth Support: 30 bit, 36 bit and 48 bits 
(16 bits per color)
Vertical Frequency: Supports 60Hz & 120Hz DC-
coupled inputs and outputs
Regulatory Compliance: RoHs compliant and 
CL3 rated
Temperature: -40°C to +85°C operating range
Shielding & Protection:
    Triple-layer shielding for EMI/RFI rejection
    24 AWG copper wire construction

Dimensions:
    HDMI Cable Diameter: 0.37” (9.5mm)
    HDMI Connector: 0.55” H x 0.8”W x 1.5”L   

Net Weight:  1.2 lbs
Warranty: Full 1-Year parts and labor

*NOTICE*
Side labeled “Input” should be connected to the 
source. Side labeled “Output” should be connected to 
the sink (display).

The KanexPro High Speed HDMI 
cables with Ethernet are for 
applications that require high-

performance transmission of 

HDMI digital video and multi-

channel audio signals. These 

cables have active amplification 

built-in to the cable prevent 

impedance mismatch, caused by 

the cable attenuation, dielectric 

losses and compensation for skin 

effect over long distances.

For flawless transmission, the 

output of the cable is placed at 

the end of the display to amplify 

full signal transmission with zero 

signal loss. These cables are fully 

CL3 certified which surpasses 

any in-wall code requirement 

for residential or commercial 

installations.

High-resolution  
HDMI cables - 25ft

High Speed HDMI cables with Ethernet 
plus signal equalization 

• Available in lengths of 25 feet, 50 feet, 75 feet 

and 100 feet

• 24 AWG Copper Wire Construction 

 
Note: The 25ft cable does not include the 
booster chip for equalization since active sync 
and equalization is built-in to the cable.