KanexPro HD100FTCL314 Leaflet

Page of 1
The KanexPro High Speed HDMI cables with Ethernet are designed with built-in booster for applications that
require high-performance transmission of HDMI/DVI digital video and multi-channel audio signals. These cables 
have active amplification built-in to prevent impedance mismatch, caused by the cable attenuation, dielectric 
losses and compensation for skin effect over long distances. For flawless transmission, the output of the cable  
is placed at the end of the display to amplify full signal transmission with zero signal loss. The built-in booster 
does not require an external power, since it is using the 5-volt from pin 18 on the HDMI cable extracting the 
power from the display. These cables are fully CL3 certified which surpasses any in-wall code requirement for 
residential or commercial installations.
Sales & Support: (888) 644-4149
PERFORMANCE
RELIABILITY 
AND
VALUE
Features
•  Support color depths to 48 bits
•  Up to 100 Mbps of bi-directional (full-duplex) bandwidth is  
  accessible over the HDMI Ethernet Channel
•  HDCP compliant 
•  No external power required
•  
Available in lengths of 25 feet, 50 feet, 75 feet and 100 feet
•  High Speed HDMI cables with Ethernet
•  Built-in booster for active signal amplification
•  8–levels of selectable equalization
•  3D and 4Kx2K support (4-times the resolution of 1080p)
•  Compatible with prior versions of HDMI and DVI
•  Data rates up to 10.2 Gbps
Specifications
Vertical Frequency:  Supports 60Hz & 120Hz DC-Coupled 
inputs and outputs
Regulatory Compliance: RoHs compliant and CL3 rated 
Temperature: -40°C to +85°C operating range 
Triple-layer shielding for EMI/RFI rejection 
24 AWG copper wire construction
Standards: High speed HDMI cable with Ethernet 
System Management Bus (SMBus): provides control of 
boost, output amplitude, enable, and clock channel signal  
detect threshold
Data rates: Up to 10.2 Gbps
Color Depth Support: 30 bit, 36 bit and 48 bits (16 bits 
per color)
High-resolution HDMI cables with 
built-in signal booster
High Speed HDMI cables with Ethernet plus signal equalization
MPNs:  
HD25FTCL314 
- 25ft.
 
HD50FTCL314 
- 50ft.
 
HD75FTCL314 
- 75ft.
 
HD100FTCL314 
- 100ft.
About KanexPro
KanexPro carries a 
broad selection of A/V 
connectivity products 
by leveraging the core 
strength in professional 
systems enabling 
you to broadcast, 
convert, extend, split, 
or multiply HD signal 
transmissions; simply 
and cost-effectively.
KanexPro
1405 Pioneer St.
Brea CA 92821
562-501-9380
info@kanexpro.com
www.kanexpro.com
09
KanexPro is a trademark. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.  
DVI is a trademark of the Digital Display Working Group. All other product or service names are the property of their respective owners.