Rode NT6 Leaflet
M3
Multi Powered 3/4” Condenser Microphone
• 1/2” condenser capsule with remote preamp
• Gold sputtered externally biased condenser
• Two position PAD - 0dB and -10dB
• Two position High Pass Filter - fl at and 80Hz
• Convenient two-axis swivel mount
• 3m
Kevlar
®
fi bre reinforced cable
• UHeavy duty satin-nickel plated body
• Low noise and full frequency response
• Designed and manufactured in Australia
• Full 10 year warranty*
NT6
Compact 1/2” Condenser Microphone with Detachable Capsule (head)
Features
Specifi cations
Frequency Response
Polar Pattern
Included Accessories
*After online registration
Australia
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: +61 2 9648 5855
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: +61 2 9648 5855
Fx: +61 2 9648 2455
USA
PO Box 4189 Santa Barbara CA 93140 USA
Ph: +1 805 566 7777
PO Box 4189 Santa Barbara CA 93140 USA
Ph: +1 805 566 7777
Fx: +1 805 566 0071
www.rodemic.com
• Swivel
mount
• ZP1 zip pouch
• WS5
windshield
HPF @ 75Hz (12dB/Octave)
Acoustic Principle
Pressure gradient
Directional Pattern
Cardioid
Frequency Range
40Hz ~ 20,000Hz
(selectable HPF @
80Hz/12dB/octave)
(selectable HPF @
80Hz/12dB/octave)
Sensitivity
-37dB ±2dB re 1V/Pa
(16mV @ 94 dB SPL) @ 1kHz
(16mV @ 94 dB SPL) @ 1kHz
Nominal Impedence
200Ω
Equivalent Noise
19dBA SPL
(A - weighted per IEC651)
(A - weighted per IEC651)
Maximum Output
+6dBu
(@ 1% THD into 1kΩ)
(@ 1% THD into 1kΩ)
Dynamic Range
119dB (per IEC651)
Maximum SPL
135dB (@ 1kHz, 1% THD
into 1kΩ load)
145dB with PAD enabled
into 1kΩ load)
145dB with PAD enabled
Signal/Noise
75dB SPL
(A - weighted per IEC651)
(A - weighted per IEC651)
Output Connection
3 pin XLR, balanced
output between Pin 2 (+),
Pin 3 (-) and Pin 1 (ground)
output between Pin 2 (+),
Pin 3 (-) and Pin 1 (ground)
Dimensions
Preamp:
Length - 188.4mm
Diameter - 20mm
Capsule:
Length - 88.5mm
Diameter - 20mm
Length - 188.4mm
Diameter - 20mm
Capsule:
Length - 88.5mm
Diameter - 20mm
Power Req.
P48/24 Phantom Power
Shipping Weight
560g
Net Weight
386g