Panduit FSCMC6EI Leaflet
w w w. p a n d u i t . c o m
SPECIFICATION SHEET
SC OptiCam
®
Connectors
Factory pre-polished fiber Eliminates inconsistent and time-consuming field polishing to deliver
stub endface
stub endface
required optical performance; reduces termination time (less than
half the time of field polish connectors) and the number of installation
tools required
half the time of field polish connectors) and the number of installation
tools required
Dual cam design with
Secures both the fiber and the buffer during the camming step to
fiber and buffer clamps
facilitate consistent termination results; reduces the termination time
compared to conventional termination methods
compared to conventional termination methods
Allows up to two re-terminations to achieve optimum termination
results; reduces the number of rejected connectors and terminations
to provide yield rates approaching 100% for lower installed costs
results; reduces the number of rejected connectors and terminations
to provide yield rates approaching 100% for lower installed costs
Translucent inner
Facilitates inspection of the fiber termination quality; results in rapid
housing assembly
installations, improved termination yields, and lower installed costs
Non-optical disconnect
Maintains data transmission under tensile loads for jacketed cable
Mechanical cable retention Consistently provides higher than industry standard cable retention;
requires no adhesive, speeding installation
Choice of zirconia ceramic Provides material option with comparable performance to meet
or composite ferrules
or composite ferrules
application requirements; zirconia ceramic provides the highest
durability for repeated matings
durability for repeated matings
OptiCam
®
Termination Tool
Universal termination tool Secures both fiber and buffer in one action for all OptiCam
®
Connectors with connector specific cradles (included); ensures
fast, consistent, and optimal terminations
fast, consistent, and optimal terminations
Integrated visual
Offers visual indication of proper termination after the cam step
termination indicator (VTI) has been completed; virtually eliminates operator error to deliver
a higher yield for a lower installed cost
Standards requirements:
TIA/EIA-604 FOCIS-3 compliant; exceeds
TIA/EIA-568-B.3 requirements
TIA/EIA-568-B.3 requirements
Fiber compatibility:
62.5/125µm OM1, 50/125µm OM2, 10Gig
™
50/125µm laser
optimized OM3/OM4 and 9/125µm OS1/OS2
Fiber cable type:
900µm tight-buffered cable only
Fiber cable size:
1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots
Ferrule type:
Zirconia ceramic or composite ferrule with a pre-polished fiber stub
Insertion loss:
Ceramic: 0.3dB average (multimode and singlemode)
Composite: 0.3dB average (multimode)
Composite: 0.3dB average (multimode)
Return loss:
Ceramic: >20dB (multimode), >26dB (10Gig
™
multimode),
>50dB (singlemode)
Composite: >20dB (multimode)
Composite: >20dB (multimode)
t e c h n i c a l i n f o r m a t i o n
k e y f e a t u r e s a n d b e n e f i t s
a p p l i c a t i o n s
s p e c i f i c a t i o n s
SC fiber optic connectors are widely used in
fiber optic backbone and horizontal applications
for high-speed data transmission. Typical
applications for SC OptiCam
fiber optic backbone and horizontal applications
for high-speed data transmission. Typical
applications for SC OptiCam
®
Connectors
include maintenance or emergency restoration
of fiber networks and retrofit/initial install in both
behind-the-wall (BTW) and in the permanent side
of panelized interconnect and cross-connect.
SC OptiCam
of fiber networks and retrofit/initial install in both
behind-the-wall (BTW) and in the permanent side
of panelized interconnect and cross-connect.
SC OptiCam
®
Connectors eliminate the need
for end face polishing and adhesive providing
easier, faster installation, especially in remote
areas and confined spaces. The hand-held
OptiCam
easier, faster installation, especially in remote
areas and confined spaces. The hand-held
OptiCam
®
Termination Tool gives installers the
flexibility to terminate in very close proximity to
the application without having to switch tools
or find benchtop space.
the application without having to switch tools
or find benchtop space.
SC OptiCam
®
Pre-Polished Fiber Optic Connectors
SC pre-polished fiber optic connectors shall be TIA/EIA-604 FOCIS-3
compliant and contain a factory-terminated fiber, eliminating field
polishing and adhesive. SC pre-polished connectors shall have
an average insertion loss of 0.3dB per mated pair for multimode
and singlemode fiber. SC pre-polished connectors shall
captivate fiber and buffer in one action allowing for up to
two re-terminations with no degradation in performance.
compliant and contain a factory-terminated fiber, eliminating field
polishing and adhesive. SC pre-polished connectors shall have
an average insertion loss of 0.3dB per mated pair for multimode
and singlemode fiber. SC pre-polished connectors shall
captivate fiber and buffer in one action allowing for up to
two re-terminations with no degradation in performance.
SC OptiCam
®
Pre-Polished Connectors
with Zirconia Ceramic Ferrules
10Gig
™
50/125µm (laser
optimized) simplex:
FSCMCXAQ
▲
10Gig
™
50/125µm (laser
optimized) duplex:
FSCDMCXAQ
50/125µm simplex:
FSCMC5BL
▲
50/125µm duplex:
FSCDMC5BL
62.5/125µm simplex:
FSCMC6BL
▲
62.5/125µm duplex:
FSCDMC6BL
9/125µm simplex:
FSCSCBU
▲
SC OptiCam
®
Pre-Polished Connectors
with Composite Ferrules
50/125µm simplex:
FSCMPC5BL
▲
62.5/125µm simplex:
FSCMPC6BL
▲
OptiCam
®
1.6/2.0mm Boot Assemblies
10Gig
™
multimode (aqua):
FMCBT2AQ-X*
Multimode (black):
FMCBT2BL-X
Singlemode (blue):
FSCBT2BU-X
OptiCam
®
3.0mm Boot Assemblies
10Gig
™
multimode (aqua):
FMCBT3AQ-X*
Multimode (black):
FMCBT3BL-X
Singlemode (blue):
FSCBT3BU-X
*X = Bag of 10 Boots; 100 per carton.
OptiCam
®
Termination Tooling
OptiCam
®
Termination Kit:
FCAMKIT
OptiCam
®
Conversion Kit
(upgrades Opti-Crimp
®
Kit to also terminate
OptiCam
OptiCam
®
Connectors):
FPPKIT-CVY
Field Polish Kit Upgrade
(upgrades Field Polish
Kit to also terminate
OptiCam
(upgrades Field Polish
Kit to also terminate
OptiCam
®
Connectors):
FIELDKITUPG
SC cradles (2 per pkg.):
FSCC
SC Fiber Optic Adapters
10Gig
™
multimode:
FADSCAQ-L*
Multimode:
FADSCEI-L
Singlemode:
FADSCZBU-L
*L = Bag of 50 adapters; 100 per carton.
Mini-Com
®
SC Adapter Modules
10Gig
™
multimode:
CMDAQSC**
Multimode:
CMDEISC**
Singlemode:
CMSBUSCZ**
**Substitute for module color: EI = Electric Ivory,
BU = Blue, BL = Black, IW = Off White,
AW = Arctic White.
BU = Blue, BL = Black, IW = Off White,
AW = Arctic White.
Opticom
®
SC Fiber Adapter Panels
3 duplex MM adapters:
FAP3WEIDSC
3 duplex SM adapters:
FAP3WBUDSCZ
6 simplex MM adapters:
FAP6WEISC
6 simplex SM adapters:
FAP6WBUSCZ
Opti-Core
®
SC Patch Cords
Duplex SC to SC:
F^D3-3M‡Y
Simplex SC to SC:
F^S3-3M‡Y
Duplex SC to LC:
F^D3-10M‡Y
Simplex SC to LC:
F^S3-10M‡Y
▲
Add -C to simplex connector part numbers
for bulk packs of 100 connectors.
^Substitute for fiber type: 6 = 62.5/125µm OM1,
5 = 50/125µm OM2, X = 10Gig
^Substitute for fiber type: 6 = 62.5/125µm OM1,
5 = 50/125µm OM2, X = 10Gig
™
50/125µm
OM3/OM4 or 9 = 9/125µm OS1/OS2.
‡Substitute for length in meters: 1, 2, 3, 5 or 10.
Contact Customer Service for other available lengths.