Pataco RUNFHL1 Leaflet
BATTERY REPLACEMENT
1. Open the battery cover.
2. Remove old batteries and replace two
new 1.5 V AAA alkaline batteries according
to the polarity markings.
3. Close the battery cover.
2. Remove old batteries and replace two
new 1.5 V AAA alkaline batteries according
to the polarity markings.
3. Close the battery cover.
HANDLEBAR BRACKET INSTALLATION & DETACHMENT
1. Mount the handlebar bracket on the stem
(range is 18 - 36mm in diameter).
2. Pull the handlebar strap tight and close
the strap clasp for additional grip.
3. Place the excess strap behind the gate.
4. For detaching the handlebar bracket, press
the button and release the handlebar strap.
(range is 18 - 36mm in diameter).
2. Pull the handlebar strap tight and close
the strap clasp for additional grip.
3. Place the excess strap behind the gate.
4. For detaching the handlebar bracket, press
the button and release the handlebar strap.
HEADLIGHT, BASE PLATE & HANDLEBAR BRACKET ATTACHMENT
2 x 1.5 V "AAA"
Alkaline
Batteries
Open
Battery Cover
ON/OFF
Button
Stem
Handlebar
Bracket
Handlebar
Strap
Strap
Clasp
Gate
Button
LOCK
Bracket
Lock
Loose
LOCK
Slide &
Lock
Tighten
Bracket
Lock
Headlight
Screw
Base
Plate
Stem
MANUAL
RUNTASTIC HEADLAMP
Art. No.: RUNFHL1
Model: PBS0C2A001
Model: PBS0C2A001
Dismantling opening
of the headband
1. Dismantle headband
2. Insert the headlight to the base plate
2. Insert the headlight to the base plate
and then fix it securely by tightening
the screw.
the screw.
3. Make sure the bracket lock is in the
UNLOCK position.
4. Slide the base plate with headlight
attached into the handlebar bracket.
5. Click LOCK.