ABUS FU8110 Leaflet
Secvest 2WAY Wireless Keypad
Art. no. FU8110
• For arming/disarming the alarm panel
• Integrated proximity key fob reader with optional external power supply
• Possible to switch outputs
• Power supply via battery and external source (12 V)
• Power supply using batteries and external power supply (12 V)
• LEDs for displaying the current system status
• Integrated proximity key fob reader with optional external power supply
• Possible to switch outputs
• Power supply via battery and external source (12 V)
• Power supply using batteries and external power supply (12 V)
• LEDs for displaying the current system status
The Secvest 2WAY wireless keypad is an optional accessory for the Secvest 2WAY. You can operate your system
from any wireless keypad using your PIN code. If the wireless keypad is supplied externally with 12V, arming and
disarming by proximity chip key is also possible. Up to 4 control units can be integrated into the alarm system.
Arranged in various parts of your building, these expansion modules guarantee additional convenience. The
Secvest 2WAY can be armed or disarmed directly on the wireless keypad, without having to go back to the central
alarm panel each time. Entering an additional code becomes redundant. The four buttons are programmed on
the central Secvest 2WAY alarm panel. In addition to the internal arming or the arming of individual
sub-sections, you can also activate an output via this keypad, e.g. the garage door. Due to protection class IP54,
you can also use the wireless keypad outdoors.
from any wireless keypad using your PIN code. If the wireless keypad is supplied externally with 12V, arming and
disarming by proximity chip key is also possible. Up to 4 control units can be integrated into the alarm system.
Arranged in various parts of your building, these expansion modules guarantee additional convenience. The
Secvest 2WAY can be armed or disarmed directly on the wireless keypad, without having to go back to the central
alarm panel each time. Entering an additional code becomes redundant. The four buttons are programmed on
the central Secvest 2WAY alarm panel. In addition to the internal arming or the arming of individual
sub-sections, you can also activate an output via this keypad, e.g. the garage door. Due to protection class IP54,
you can also use the wireless keypad outdoors.
Page 1 of 2
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 12/2014