MIPRO ACT-51 ACT 51(6A) User Manual
Product codes
ACT 51(6A)
PART NAMES AND FUNCTIONS
Antenna “A” Front Mount: Allows an optional FBC-71 rear-to-front antenna
cable for front antenna placement.
Receiver Display: Color VFD.
Power On/Off Button: Press and hold button to power on and power off.
Antenna “B” Front Mount: Allows an optional FBC-71 rear-to-front antenna
cable for front antenna placement.
Rear Antenna “B” Input Connector: The “B” antenna can be installed directly
to this antenna connector which also provides power to an optional antenna
booster.
to this antenna connector which also provides power to an optional antenna
booster.
Balanced Audio Output Jack: XLR type connector provides balanced audio
output signal from this jack to the mixer, and output level selectable from among
3 levels:
“-6dB” , “0dB” and “+16dB”.
output signal from this jack to the mixer, and output level selectable from among
3 levels:
“-6dB” , “0dB” and “+16dB”.
Level Switch: “0dB” selection is for “Microphone-level” output. “+10dB” selection
is for “AUX level” output. “-6dB” selection is for half of cable microphone volume.
is for “AUX level” output. “-6dB” selection is for half of cable microphone volume.
Unbalanced Audio Output Jack: 6.3mm (1/4”) PHONE PLUG type connector
provides unbalanced audio output signal from this jack to the mixer. Output level
is selectable from among 3 levels: “-6dB”, “0dB” and “+10dB”.
provides unbalanced audio output signal from this jack to the mixer. Output level
is selectable from among 3 levels: “-6dB”, “0dB” and “+10dB”.
Balanced and Unbalanced Output Switch：Switch to “MIXED” mode, audio
from both channels will be mixed out from BALANCED OUTPUT B and
UNBALANCED OUTPUT B . Switching to “SEPARATE” mode (available in
ACT-52B only) and each channel has individual output.
from both channels will be mixed out from BALANCED OUTPUT B and
UNBALANCED OUTPUT B . Switching to “SEPARATE” mode (available in
ACT-52B only) and each channel has individual output.
DC Input Jack: For 12 volt DC supply.
Rear Antenna “A” Input Connector: The “A” antenna can be installed directly
to this antenna connector which also provides power to an optional antenna
booster.
to this antenna connector which also provides power to an optional antenna
booster.
Rack-Mount Brackets: To install the receiver into a standard 19-inch rack case.
Auto Power On/Off Switch:
ON position: The receiver turns on automatically when plugged-in during “ON”
position.
position.
OFF position: The receiver needs to be powered-on & off manually by pressing and
holding the Power On/Off Button during “OFF” position.
Note: Default = “OFF” position.
holding the Power On/Off Button during “OFF” position.
Note: Default = “OFF” position.
GND Connector: For grounding protection and stabilization.
8
8
5
7
9
14
13
15
6
12
11
10
16
17
3
4
5
2
3
4
2
3
4
Diversity Receivers
Diversity Receivers
Rear Panel:
ACT-51B / ACT-51
ACT-52B / ACT-52
9
14
14
13
13
8
5
7
6
12
11
10
16
17
17
8
5
7
6
CHANNEL 1
SQ
AF
A
B
1
2
3
4
5
6
7
8
MHz
GRP
BAT
CHANNEL 2
SQ
AF
A
B
1
2
3
4
5
6
7
8
MHz
GRP
BAT
CHANNEL 1
SQ
AF
A
B
1
2
3
4
5
6
7
8
MHz
GRP
BAT
Front Panel:
ACT-51B /ACT-51
2
3
4
1
ACT-52B / ACT-52
6
1
1
15
15