Fujitsu TX1330 M1 VFY:T1331SC030IN/R3 Data Sheet

Product codes
VFY:T1331SC030IN/R3
Page of 9
Data Sheet
 FUJITSU Server PRIMERGY TX1330 M1 Tower Server 
Page 3 / 9
www.fujitsu.com/fts
Technical details
PRIMERGY TX1330 M1
Base unit
PRIMERGY TX1330 M1 LFF
PRIMERGY TX1330 M1 SFF
PRIMERGY TX1330 M1 LFF
PRIMERGY TX1330 M1 SFF
Housing types
Tower
Tower
Tower
Tower
Storage drive architecture
3.5-inch
2.5-inch
3.5-inch
2.5-inch
Power supply
Standard
Standard
Hot-plug
Hot-plug
Mainboard
Mainboard type
D3239
Chipset
Intel® C224
Processor quantity and type
1 x Intel® Pentium® processor / Intel® Core™ i3 processor / Intel® Xeon® processor E3-1200v3 product family
Processor
Intel® Core™ i3-4330 processor (2C/4T, 3.50 GHz, TLC: 4 MB, Turbo: No, Mem bus: 1,600 MHz, 54 W)
Intel® Pentium® processor G3420 (2C/2T, 3.20 GHz, TLC: 3 MB, Turbo: No, Mem bus: 1,600 MHz, 54 W)
Intel® Xeon® processor E3-1220v3 (4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: 3.30 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1231v3 (4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: 3.60 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1241v3 (4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: 3.70 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1271v3 (4C/8T, 3.60 GHz, TLC: 8 MB, Turbo: 3.80 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1275Lv3 (4C/8T, 2.70 GHz, TLC: 8 MB, Turbo: 3.30 GHz, Mem bus: 1,600 MHz, 45 W)
Intel® Xeon® processor E3-1281v3 (4C/8T, 3.70 GHz, TLC: 8 MB, Turbo: 3.90 GHz, Mem bus: 1,600 MHz, 82 W)
Memory slots
Memory slot type
DIMM (DDR3) UDIMM
Memory capacity (min. - max.)
4 GB - 32 GB
Memory protection
ECC
Memory notes
Mix and match possible; with dual channel operation better performance (2 modules with equal capacity necessary). 
Single channel (1 module) configuration possible.
Memory options
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, single rank
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, dual rank
Memory modules notes
1333MHz or 1600 MHz memory modules
Interfaces
USB 2.0 ports
6 (4x external  rear, 1x external front, 1x internal for UFM, no USB wakeup supported)
USB 3.0 ports
4 (2x external  rear, 1x external front, 1x internal)
Graphics (15-pin)
1 analog graphics interface derived from iRMC (up to 1600x1200 or 1920x1080 at 16bpp)
Serial connection
1 x serial RS-232-C,  usable for iRMC or system or shared
LAN / Ethernet
2 x1 Gb/s Ethernet; RJ45
Management LAN (RJ45)
1 x dedicated management LAN port for iRMC S4  (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller
Optionally integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot).
additional RAID controller options are described under Components RAID controller
SATA Controller
Intel® C224, 2 ports used for accessible drives 
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
LAN Controller
Intel® i217 + Intel® i210 onboard, 2 x 10/100/1000 Mbit/s Ethernet, Intel® i217LM: 2xTX/2xRX, iSCSI remote boot 
support, APM wake up.
Intel® i210, 4xTX/4xRX, iSCSI and PXE 2.0-remote Boot via LAN, WoL.
Service LAN: Realtek RTL8211E
Remote management controller
Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Trusted Platform Module (TPM)
Infineon / 1.2 (option)
Slots
PCI-Express 3.0 x8
2 x (up to 240 mm length)
PCI-Express 2.0 x1 (mech. x4)
1 x (up to 167 mm lenght)