Kramer Electronics TP-578H Leaflet

 

HDMI, Audio & Data over DGKat Twisted Pair Receiver

 

 

The TP

−

578H is a DGKat twisted pair 

receiver for HDMI, IR and control signals. 
The unit receives a DGKat twisted pair 
signal from a compatible Kramer DGKat 
transmitter (such as a TP

−

577VH) and 

decodes it into HDMI, balanced and 
unbalanced stereo, S/PDIF digital audio, IR 
and RS

−

232 signals. 

Max. Data Rate

 - 4.95Gbps (1.65Gbps per graphic channel).

 

 

HDTV Compatible.  

HDCP Compliant.  

HDMI Support

 - x.v. Color™, 3D and 7.1 multi

−

channel audio.

  

DGKat™ Signal Integration

 - Kramer’s unique technology for converting TMDS as well as control and communication 

to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed 
specifically for optimum performance.

  

Kramer Equalization & re-Klocking™ Technology

 - Rebuilds the digital signal to travel longer distances.

  

K-Link™

 - Kramer's technology for controlling the device from a remote controller and passing data to external 

devices.

  

PowerConnectPlus

 - A single connection to the transmitter or the receiver powers both units. The higher voltage 

PowerConnectPlus also powers regular PowerConnect devices via auto

−

negotiation.

  

Configurable External Control.  

Analog and Digital Audio De-Embedding.  

Indicators

 - LEDs for mirroring.

  

System Range

 - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC

−

DGKat524 cable. Up to 

90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC

−

DGKat623 cable. Up to 100m (330ft) at 1080i or 

up to 90m (295ft) at 1080p on shielded BC

−

DGKat7a23 cable.

  

Cable

 - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's 

BC

−

DGKat623 or BC

−

DGKat7a23 cables. Note that the transmission range depends on the signal resolution, 

graphics card and display used. The distance using non

−

Kramer CAT 6 and CAT 7 cables may not reach these 

ranges. Use only shielded cable where both ends of the shield are soldered to ground.

  

Controls

 - IR data transceiver.

  

FEATURES