RAM Mount RAM-VB-129-SW1 Leaflet

Page of 1
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
SPECIFICATIONS
Placement
Passenger side on horizontal section of seat 
rail.  For Sprinter, between seat cushion and 
seat frame box passenger side front of seat
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Dimensions
A = 19.375” B = 7.125”
Hole Center = 16.5"
Pole or Pedestal
Purchased Separatel
Weight = 4.9 lbs.
Features
RAM-VB-129-SW1
RAM-VB-129
Important Note
Installs with no drilling required
Minimal intrusion into passenger leg space
In 2005 and 2011 model year vehicles, the seat leg bolts may be tied to the air 
bag system.  Tampering with these may result in disabling the air bag 
system and causing a severe safety hazard.  The installation of this 
product into these vehicles should only be done by a Dodge factory 
authorized technician or Up-fitter familiar with Police, Fire, and Rescue 
vehicles and their fleet use.
RAM No-Drill
 TM
 Seat Bases
National Products, Inc.
Item Number
RAM-VB-129 & RAM-VB-129-SW1
National Products, Inc.
Website: www.ram-mount.com
Email: staff@ram-mount.com
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615 
COMPATIBLE VEHICLES:
DODGE CHARGER (2005, 2011-2014)
DODGE CHARGER POLICE (2005, 2011-2014)
DODGE MAGNUM (2005)
DODGE MAGNUM POLICE (2005)
DODGE CHALLENGER (2011)
DODGE SPRINTER VAN (2007-2010)
FREIGHTLINER SPRINTER VAN (2010-2011)
MERCEDES SPRINTER VAN (2010-2013)