Eaton CMMZ-00/08 106291 User Manual
Product codes
106291
EATON - WIRELESS SYSTEM
80
Functions overview for actuators in Comfort Mode (by means of MRF-Software and PC) - continued
For each sensor assigned (max. 15 sensor per actuator) the following different functions can be selected:
Analogue actuator functions that can be selected in Comfort Mode
ON / OFF / Dimming (Standard in Basic-Mode)
Switches ON, OFF or DIMS
ON / switch-on delay time
Switch-on command which is carried out immediately or after an adjustable delay time
OFF / switch-off delay time
Switch-off command which is carried out either immediately or after an adjustable delay time
OFF with advance warning
Staircase light function that switches ON immediately and switches OFF after an adjustable delay time. 15 seconds before the
dimming actuator switches OFF, the output unit will flash once as an advance warning.
Dimming function through push-button activation
The analogue actuator switches ON or OFF upon a short push at the button and dims up or down upon a long push at the button
Power impulse
The analogue actuator changes its initial state every time it is activated, while dimming at the same time
Flashing, takes the dimming time into account
Upon activation, the analogue actuator starts flashing after an adjustable interval time while dimming at the same time
Analogue value desired
The analogue actuator dims at the preset dimming speed (dimming time) towards a preset analogue value
No function
As indicated
Functions available:
Delay time depending on each function:
0 seconds to 18 hours
Interval time of flashing:
2 seconds to 18 hours
Command time for a long push at the button:
1 to 5 seconds
Dimming time:
0 to 250 seconds
Dimming limits:
0 to 100%
Characteristic:
Linear, logarithmical
Relay switches as well:
YES/NO
Identification of the battery status (flashing upon switch-on)
Behaviour of the output unit when power supply is restored
Info:
OFF: 0 VDC (CAAE-01/01) or 1 VDC (CAAE-01/02)
ON: 10 VDC (CAAE-01/01 and CAAE-01/02)
Other settings: