RAM Mount RAM-VB-185 Leaflet

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 8410 Dallas Ave S
Seattle, WA 98108
Website: www.ram-mount.com
Email: staff@ram-mount.com

Placement
Passenger side floor board, over seat frame legs

Seat Configuration
Bucket/Bench

Construction/Finish
Steel/Black Powder coat

Pole or Pedestal
Purchased Separately

Weight
9.4 lbs.

Ratchet wrench, 19

mm socket, and universal joint extension for base 

installation

.

  The removal of factory seat leg bolts will require a 

13/16” socket.

A = 18.15", B = 7.05", C = 3.74”
Hole Center = 11.5"

Installs with no drilling required

For model year trucks 1999 through 2010, the use of the one inch 
stand offs is required.  For 2011 model year trucks, the tallest stand 
offs are required to clear the under seat air duct in the extended cab or 
crew cab models. For bench seats, it is necessary to expose the hump 
side mounting hole and tap it so the supplied bolt has an anchor point.  
You’ll need an M12-1.75 tap.

RAM No-Drill

 TM

 Seat Bases

National Products, Inc.

Item Number
RAM-VB-185

RAM-VB-185

RAM-VB-185-SW1