Areca ARC-8028-32 Leaflet

Serial

Attached

SCSI

Areca is a registered trademark of Areca Technology Corporation. Other

brand names and product names are trademark or registered trademarks

of their respective companies. This specification may be changed at any

time without prior notice.

8F., No.22, Lane 35, Ji-Hu Rd., 114Taipei, Taiwan, R.O.C.
TEL: 886-2-87974060
FAX: 886-2-87975970
http://www.areca.com.tw
Technical Support: support@areca.com.tw
Sales Information: sales@areca.com.tw

6Gb/s

• LCD Control Panel for setup, alarm mute and configura-
  tion
• System status indication through LCD, LED (link status
  and activity) and alarm buzzer
• Enclosure management (protocols SES-2 over SAS
  ports) ready

Management

Electrical

Environmental

Relative Humidity

Box Controller Modules

Controller External Connectors

• Expander Board: 1 modules
• Sensors: 1 sensor on expander board

SAS Connectors
• 3/4 SFF-8644 Min SAS HD connectors
   - 1 SAS “IN” connector for connection to the host
   - 2/3 SAS “OUT” connector for expasion to next JBOD
     enclosure

Internal Connectors

LED Indicators

Drives

SAS Hot-Plug Hard Drives
• Up to 24/32 12.0 Gb/s, 6.0Gb/s or 3Gb/s SAS hard drives
  at speed of 10K or 15K rpm

SATA Hot-Plug Hard Drives
• Up to 24/32 6.0 Gb/s or 3Gb/s SATA hard drives at
  speeds of 7.2K or 10K rpm

• 6/8 x SFF-8643 Min SAS HD connectors
• 1 x 6-pin PCI-E power connector
• 4 x 3-pin fan connector
• 2 x 2-pin power status connector
• 1 x 6-pin LCD connector
• 1 x 7-pin dual expander module heartbeat connector

Serial Connector (per Expander Board)

• 1 x 6-pin UART RJ-11 connector (for expander box
manager only)
• 1 x RJ-45 LAN connector (for manufacture manager
only)

Internal fault/activity header
• 24/32 2.54mm activity and fault header

External SAS Port LED Indicators

• Two one-color LED status indicators for each SAS host
   port, one for SAS port link and one for the activity status
• Two one-color LED status indicators for each SAS
   expansion port, one for SAS port link and one for the
   activity status

Monitors/Indicators

• In-band SAS port
• Out-of-band RS232 serial port
• CLI through RS232 serial port

• Power Dissipation (+12V) 22.8W

Temperature
Operating         10° to 40°C
Storage             –40° to 70°C

Operating 10% to 80% (non-condensing)
Storage 5% to 95% (non-condensing)

Physical

41(H) x 145(W) x 200(D) mm

Model Name

Interface

External

SAS Ports

External SAS

Port Type

Internal

SAS Ports

Internal SAS

Port Type

Product View

ARC-8028-24

ARC-8028-32

12Gb/s SAS

SFF-8644

SFF-8643