HGST HCS5C3232SLA380 User Manual
HITACHI CinemaStar 5K 320 Hard Disk Drive specification (Rev 1.21)
19
6.3 DC power requirements
Damage to the drive electronics may result if the power supply cable is connected or disconnected to the legacy
Power connector while power is being applied to the drive (no hot plug/unplug is allowed). If SATA power supply
cable is connected or disconnected to the SATA power connector, hot plug/unplug is allowed.
Power connector while power is being applied to the drive (no hot plug/unplug is allowed). If SATA power supply
cable is connected or disconnected to the SATA power connector, hot plug/unplug is allowed.
6.3.1
Input voltage
Input voltage
During run and spin up
Absolute max
spike voltage
Supply rise time
+5 Volts Supply
5V ± 5%
–0.3 to 5.5V
0 to 5sec
+12 Volts Supply
12V ±10%
–0.3 to 15.0V
0 to 5sec
Table 14
Input voltage
Caution : To avoid damage to the drive electronics, power supply voltage spikes must not exceed
specifications.
specifications.
6.3.2
Power supply current (typical)
Power supply current
+5 Volts [mA]
+12 Volts [mA]
Total
[W]
(values in milliamps. RMS)
Pop Mean
Std Dev
Pop Mean
Std Dev
Idle average
205
5
145
10
2.8
Idle ripple (peak-to-peak)
169
10
133
10
Low RPM Idle
140
5
106
10
2.0
Low RPM Idle Ripple
82
10
135
10
Unload Idle average
140
5
147
10
2.5
Unload Idle Ripple
81
10
109
10
Random R/W average
1
(Quiet Seek)
291
10
333
10
5.4
Random R/W peak(Quiet Seek)
714
30
942
30
Start up (max)
503
20
1715
40
Standby average
124
5
6
3
0.7
Sleep average
120
5
6
3
0.7
Table 15
Power supply current
Except for a peak of less than 100
s duration
1
Random R/W : 40 IOPS / 16 Blocks Random Write and Random Read