Meraki MA-INJ-4-EU Data Sheet
Product Highlights
DATA SHEET
Reliable, standard-compliant power
for your Meraki devices
for your Meraki devices
Increased Flexibility, Reduced Installation Time and Cost
One of the main limitations in designing your wireless network is
the availability of power. Running power cabling is also a primary
cost driver of wireless installations. The Meraki PoE injector allows
delivery of both data and power to a Meraki access point over
a single Ethernet cable, allowing deployment of devices exactly
where they are needed to provide the best wireless coverage at a
much lower installation cost.
the availability of power. Running power cabling is also a primary
cost driver of wireless installations. The Meraki PoE injector allows
delivery of both data and power to a Meraki access point over
a single Ethernet cable, allowing deployment of devices exactly
where they are needed to provide the best wireless coverage at a
much lower installation cost.
The Meraki 802.3at PoE Injector provides fully compliant 802.3at
detection, with disconnect, short-circuit and overload protection to
ensure that only 802.3at and 802.3af devices receive power and
non-compliant devices are not accidentally damaged. Using this
injector, it is possible to power the latest generation of 802.11ac de-
vices which require 802.3at power, as well as providing backward
compatibility with legacy 802.11n devices with traditional 802.3af
power.
detection, with disconnect, short-circuit and overload protection to
ensure that only 802.3at and 802.3af devices receive power and
non-compliant devices are not accidentally damaged. Using this
injector, it is possible to power the latest generation of 802.11ac de-
vices which require 802.3at power, as well as providing backward
compatibility with legacy 802.11n devices with traditional 802.3af
power.
Regardless of the deployment scenario, powering Meraki devices
with 802.3at Power over Ethernet is a flexible and low-cost method
to simplify the installation process while ensuring that network
design is not compromised by power availability limitations.
with 802.3at Power over Ethernet is a flexible and low-cost method
to simplify the installation process while ensuring that network
design is not compromised by power availability limitations.
Meraki 802.3at Power over Ethernet Injector
• Reduces cost and simplifies installations by eliminating
need to provide separate power line
• Increases installation flexibility by powering devices from
up to 100 meters away
• Fully IEEE 802.3at standard compliant
• Gigabit compatible
• Power, load detection and fault diagnostics LEDs
Cisco Systems, Inc. | 500 Terry A. Francois Blvd, San Francisco, CA 94158 | (415) 432-1000 | sales@meraki.com
Meraki Datasheet |
802.3at PoE Injector