Philips Electric shaver RQ1095 RQ1095/22 User Manual

 - The shaving heads may be damaged or 

worn. Replace the shaving unit (see chapter 

‘Replacement’).

 2 

 Why doesn’t the shaver work when I press the 

on/off button?

 - The battery may be empty. Recharge the battery 

(see chapter ‘Charging’).

 - The travel lock may be activated. Press the on/off 

button for 3 seconds to deactivate the travel lock.

 - The shaving unit is soiled or damaged to such an 

extent that the motor cannot run. In this case, 

the shaving unit symbol, the tap symbol and the 

exclamation mark flash. When this happens, you 

have to clean the shaving unit or replace it.

 - The temperature of the shaver may be too high. 

In this case, the shaver does not work and the 

exclamation mark on the display flashes. As soon 

as the temperature of the shaver has dropped 

sufficiently, you can switch on the shaver again.

 3 

 Why isn’t the shaver entirely clean after I 

cleaned it in the Jet Clean System?

 - The cleaning fluid in the cleaning chamber may be 

soiled. Empty and rinse the cleaning chamber.

 - The cleaning fluid level may be too low. If the 

fluid volume in the cleaning chamber drops below 

the minimum level during the cleaning program, 

the program aborts.The cleaning light and the 

‘cleaning chamber empty’ symbol flash at intervals 

and the holder returns to its starting position. 

Refill the cleaning chamber with cleaning fluid up 

to the MAX indication (see chapter ‘Cleaning and 

maintenance’).

 - You may have used another cleaning fluid than 

the original Philips cleaning fluid. Only use HQ200 

cleaning fluid.

26