LevelOne IES-1870 IES1870 Leaflet

LevelOne IES-1870 Industry Ethernet Switch provides 16 ports of 

10/100Base-TX plus 2 ports of 1000Base Gigabit Ethernet to enable high 

speed network at mission-critical environment. This device is designed 

to be mounted on an industry standard DIN-rail, plus the clearly visible 

status LEDs provide simple monitoring of port link activity. 

This device operates under -10 to 60 Celsius (-14 to 140 Fahrenheit) 

temperature that offers optimal suitability for industrial applications at 

low cost while maintaining all components built to withstand harsh 

environment applications without compromise reliability and stability.

- Supports α-ring and RSTP/MSTP/STP for Ethernet redundancy

- IP Multicast Filtering through IGMP Snooping V1, V2 & V3

- Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP

- IEEE802.1p QoS with four priority queues

- MAC-based trunkingand LACP

- IEEE802.1x Security

- Bandwidth Rate Control

- Per-port programmable MAC address locking

- Up to 24 Static Secure MAC addresses per port

- Port mirroring

- NTP synchronization

- DHCP Client/Server

- RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and 

   TFTP Management

- 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, 

   Auto-Negotiation, Auto-MDI/MDIX

- Full wire-speed forwarding rate

- -10°C to 60°C (14°F to 140°F) and is tested for functional operation @ 

   -20°C to 70°C (-4°F to 158°F)

This redundant power system is designed to meet the challenge of 

power failure to ensure reliability and constant availability. Single power 

design works fine in non-critical network applications, but it falls short 

drastically for network applications in transportation, automate 

production or banking.

Supports a variety of management features including: CLI via Console or 

Telnet; Graphic User Interface via Web Browser or Simple Network 

Management Protocol via SNMP tools. It provides better visibility and 

management of those critical assets.

Supports Ring topology network providing simple installation and ultra 

fast network recovery performance, less than 15ms. Unlike much 

complex resilient topology, such as a redundant star, the Ring simplifies 

the network design and requires less cabling installation. In addition, 

fast network recovery time helps minimize system downtime.

The housing is designed with small footprint, it can be installed on the 

DIN Rail or Rack, and ideally suited for the limited available space; It is 

also leveraging a reliable fanless and durable housing which is more 

efficient and immune to dust.

Unit: mm

Side

Buttom

Top

Front

59

14

5
14

5

12

5