Avocent 1U 17" single rail LCD rack console with integrated 8 port KVM switch LCD17SWT8-201 User Manual
Product codes
LCD17SWT8-201
Chapter 1: Installation
3
Rack Mounting Your Integrated LCD KVM Switch
Your Integrated LCD KVM Switch may be rack mounted using brackets.
Before installing the switch, stabilize the rack in a permanent location.
Be sure to rack your Integrated LCD KVM Switch in an area of the
cabinet that will allow you to utilize the LCD monitor, keyboard and
mouse funtions.
Before installing the switch, stabilize the rack in a permanent location.
Be sure to rack your Integrated LCD KVM Switch in an area of the
cabinet that will allow you to utilize the LCD monitor, keyboard and
mouse funtions.
CAUTION: Rack Loading - Overloading or uneven loading of racks may result in
shelf or rack failure, causing damage to equipment and possible personal injury.
Do not exceed your rack load rating.
shelf or rack failure, causing damage to equipment and possible personal injury.
Do not exceed your rack load rating.
To mount the Integrated LCD KVM Switch:
1.
Loosen the four rear screws of each mounting bracket without
completely removing the screws. You will have to extend the
bracket to access two of the screws on the bracket.
completely removing the screws. You will have to extend the
bracket to access two of the screws on the bracket.
NOTE: Mounting brackets are labeled with an “L” for the left-side bracket and an
“R” for the right-side bracket.
“R” for the right-side bracket.
2.
Using the M4 screws provided, connect both left and right brackets
to the cabinet frame. After securing the brackets to the cabinet,
tighten the four rear screws loosened in step 1.
to the cabinet frame. After securing the brackets to the cabinet,
tighten the four rear screws loosened in step 1.
Figure 1.2: Installing the Integrated LCD KVM Switch to a Cabinet
3.
Align the rear of the Integrated LCD KVM Switch with attached
brackets and slide the unit into the front of the cabinet.
brackets and slide the unit into the front of the cabinet.
NOTE: Avocent recommends having two people assist each other while rack
mounting this unit.
mounting this unit.
4.
Using the Integrated LCD KVM Switch keys, unlock the unit and
pull the rail lock switches located on the side of the unit. Guide the
Integrated LCD KVM Switch into the cabinet.
pull the rail lock switches located on the side of the unit. Guide the
Integrated LCD KVM Switch into the cabinet.