Bosch NWD-455 NWD-455V03-20P User Manual

2  | NWD‑455 FlexiDome IP Cameras

images at the best possible image quality (e.g. 30 IPS at
4CIF). Alternatively, the system deliver a high bandwidth,
MPEG-4 stream to a local LAN user, while simultaneously
streaming a low bandwidth MPEG-4 stream to a remote user
over a WAN connection, while using the JPEG stream for
remote viewing, for instance, on a PDA.
Power options
Three power options, PoE, 24 VAC (12 to 28 VAC) and
12 VDC (+11 to +36 VDC), are available on the NWD-455.
Utilizing PoE makes installation easier and more cost-
effective, since cameras do not require a local AC power
source. Additionally, they can use an uninterruptible power
supply (UPS), which will allow continuous operation, even
during a power failure, e.g. in emergencies.
OSD-based network setup
Network parameters and basic camera set-up, such as lens
set-up and back focus, are quickly and easily performed
using the on-screen displays (OSD) and composite video
monitoring output. Unlike other IP cameras, no network
connection, PC configuration utilities, or other tools are
required to set up FlexiDome IP.
Recording
The FlexiDome IP cameras offer unparalleled recording
options – network-attached utilizing iSCSI devices, and of
course centrally, using network video recorders (NVRs). The
iSCSI RAID 5 storage support enables a camera to act as a
conventional DVR, while streaming high-performance live
video across the network. The cameras also offer 10 Mb
internal RAM storage.

Safety

acc. to EN 60950-1 (CE)

acc. to UL 60950-1

Immunity

acc. to EN 50130-4 (CE)

Emission

acc. to EN 55022 class B (CE)

acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)

acc. to FCC CFR 47 Part 15, Class B

acc. to AS/NZS CISPR 22 (equal to CISPR 22)