Addonics RAID Tower Mini RTM435R5 Leaflet
Product codes
RTM435R5
INTRODUCTION
RAID TOWER MINI BASIC SPECIFICATIONS
FEATURES
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588
RAID Tower Mini
The RAID Tower Mini is based on the Mini Storage Tower platform, giving it increased portability by
being only half the size and weight of the RAID Tower IV.
Depending on the model, up to four 3.5" SATA or eight 2.5" SATA hard drives can be installed into the
RAID Tower Mini. The drives can be configured as a RAID set and connect to the computer via USB
3.0, USB 2.0 or a high speed eSATA connection. The RAID Tower Mini comes with a low noise cooling
fan and stylish design which has a front panel that swings open allowing excellent air ventilation and
easy access to your drives. Each model comes with everything you need to connect it to your
computer. All you need to do is to add the hard drives you want and configure the RAID via a simple
onboard rotary switch or software utility (depends on the RAID Tower model.)
●
Great for variety of storage applications - external RAID storage, Video storage, Server storage
●
●
Sturdy and attractive black metal frame construction
●
Compact size - 5.25 x10.4 x 7.25 in. (133.35 x 264.16 x 184.15 mm) ( W x D x H)
●
Support any SATA 1.0, 2.0 or 3.0 hard drive
●
Swing open front panel for convenient access to disk drive
●
Ventilated front panel for efficient air flow.
●
Dual ball bearing high CFM low noise cooling fans
●
180W 110/220 power supply
●
LED indicators for each storage device, RAID status, host connection and power
RTM25N335U3
RTM435R5
● Connect to system via USB 3.0 / 2.0 or eSATA port (connecting cables included).
● Install up to three 3.5" SATA hard drives of any capacity (drives not included).
● Install up to two 2.5" SATA hard drives of any capacity (drives not included).
● 3.5" drives are mounted onto the tower chassis using screws.
● 2.5" drives are added or removed like tape cartridge from each drive bay with no special tool required.
● Drives can be configured as FAST (RAID0 Striping), SAFE (RAID1 Mirroring), JBOD* (Just a Bunch Of
Disks or individual drive), BIG (combined single volume), SAFE FAST (RAID 1+0 Mirror Stripped).
● RAID setting via software utility under Windows, Mac OS or Linux.
● OS independent, can be used on any system when all drives are configured as a single RAID volume.
● RAID diagnostic software utility (for Windows, Mac and Linux)
● Connect to system via USB 2.0 or eSATA port (connecting cables included).
● Install up to four 3.5" SATA hard drives of any capacity (drives not included).
● Drives are mounted onto the tower chassis using screws.
● Drives can be configured as FAST2 (2 drive RAID 0 Striping), SAFE2 (RAID1 Mirroring), SAFE FAST
(RAID 1+0 Mirrored Stripped), BIG 2 (2 drives Concatenation), FAST4 (4 drive RAID 0 Striping), BIG 4
(4 drives Concatenation), RAID 1+0, RAID 5 over 4 drives, or RAID 5+S.
● RAID setting via a rotary switch on the back.
● OS independent, can be used on any system.
● RAID diagnostic via LED lights.
Add hard drives to create your very own powerful external RAID