Bogen WV100 Leaflet

• 100-,150-, and 250-watt models, each with a large

power reserve

• Capable of handling 70V, 25V, 8-ohm, and 4-ohm

speaker loads

• 8 module bays
• Wide selection of advanced plug-in modules
• 2 module bays capable of handling signal processing

plug-in output modules

• 4 levels of priority between modules
• 11-segment LED output level meter monitors the

output level of the power amplifier with Peak and

Average meter switch

• Adjustable output level limiter with limit indicator
• Tape output available on front of unit
• Optional front-mounted input combo jack with 

1

/4" stereo phone and female XLR capabilities

• Motorized master volume control can be remotely

operated

• Bass and treble controls with center detent
• Two-color LED for each channel indicates input

active/clipping

• Switch permits user to select either transformer-

coupled outputs or a direct low-impedance output

• Bass and treble control bypass switch (located in

module bay 6)

• 125 Hz Lo-cut feature (switch located in module 

bay 6)

• 5-position barrier strip, with clamping washers, pro-

vides connections for speaker loads

• Master mute function overrides all audio from the

mixer section of the amplifier

• Screw terminal for master mute and remote volume

control functions

• Each of the 8 module bays has an associated inde-

pendent volume control

• Remote volume control panel (RVCP) (sold sepa-

rately)

• Requires flush-mount (Model BBF) or surface-

mount (Model BBS) back boxes (sold separately)

• Requires front cover door (WMAD sold separately)
• UL and CSA Listed

Specifications subject to change without notice.
© 2002 Bogen Communications, Inc.
Part No. 54-8015-01RA  Printed in U.S.A. 0212

Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose from,
with three models ranging from 100W to 250W. The amplifiers are designed to work with both high- (70/25V)
and low- (4/8-ohm) impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority
between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each
module is controlled by an independent volume control with an associated signal/clip LED for signal status.An
11

-segment LED output meter monitors output signal level.

Each model includes a motorized master volume control that can be controlled using a remote volume control
panel (RVCP, sold separately).