Adaptec 6805Q 2270700-R User Manual
Product codes
2270700-R
Chapter 5: Installing the Controller and Disk Drives
●
53
2
Use an internal mini-SAS to SATA cable to attach the SSD(s) to the controller, as shown in
the following example.
the following example.
3
When all SSDs have been installed and connected, close your computer cabinet, reattach
the power cord, then continue with
the power cord, then continue with
Connecting External Devices
Note:
If you are not connecting any external devices, see the following section,
.
Use high-quality cables to connect your controller to your external device(s), such as disk
drives or disk drive enclosures.
drives or disk drive enclosures.
We recommend using only Adaptec cables. For more information or to purchase cables, visit
the Adaptec Web site at
the Adaptec Web site at
.
Next Steps
If you are installing the controller driver and an operating system onto a bootable array,
continue with
continue with
If you are completing a standard installation onto an existing operating system, continue with
SSD connected to controller with
internal mini-SAS to SATA Fanout cable
(SFF-8087 to 4x-SATA)
internal mini-SAS to SATA Fanout cable
(SFF-8087 to 4x-SATA)
Internal x4 mini-SAS connector
Single-port connector
To other SSDs