Transition Networks CSRFB1029-101 Leaflet
Point System™
Ordering Information
CSRFB1011-100
10/100Base-TX (RJ-45)
[100 m/328 ft.]
to 100Base-FX 1300nm MM ST
[2 km/1.2 mi.] Link Budget: 11.0 dB
CSRFB1013-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CSRFB1014-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CSRFB1040-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to SFP slot (empty)
Single Fiber Products
Recommended use in pairs
CSRFB1029-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CSRFB1029-101
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX
Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CSRFB1029-102
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
Bi-Di SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CSRFB1029-103
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX
Bi-Di SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Optional Accessories (sold separately)
SFP Modules
Specifications
Standards
IEEE Std. 802.3, TS-1000 OAM v2
Data Rate
Copper: 10/100 Mbps Fiber: 100 Mbps
Filtering Addresses
1K MAC addresses
RAM Buffers
256K
Max Frame Size
1916 bytes untagged
1914 bytes tagged
Switches
SW1: TP Auto-Negotiation
SW2: TP Duplex with
Auto-Negotiation Off
SW3: TP Speed with
Auto-Negotiation Off
SW4: Fiber Duplex
SW5: Link Pass Through
SW6: Mode: Terminal or Center
Status LEDs
Power
TP Duplex/Link/Activity
TP 10 Mbps/100 Mbps
Fiber Link/Activity
Fiber Duplex
Dimensions
Width: 0.86” [22 mm]
Depth: 5.0” [127 mm]
Height: 3.4” [86 mm]
Power Consumption
3.4 Watts
Environment
See chassis specifications
Shipping Weight
2 lbs. [.90 kg]
Regulatory Compliance
EN55022 Class A, EN55024; CE Mark
Warranty Lifetime
CSRFB10xx-10x
CSRFB10xx-10x
point system™ slide-in-module media converter
10/100BASE-TX to 100BASE-FX with Remote Management
10/100 Bridging
Remotely Managed 10/100 Bridging NID
(Network Interface Device)
Ideal for both Enterprise and Service Provider
applications where entry level management
information is needed on both the local and
the remote device. This management infor-
mation is accessible through the local unit in-
stalled in a managed Point System™ Chassis
[pg 31-32].
Devices should be used in pairs with the re-
Devices should be used in pairs with the re-
motely managed device being another chas-
sis card (CSRFB10xx-100) or stand-alone unit
(SSRFB10xx-100).
4
Integrate fiber into 10/100 copper
environments
environments
4
Remote Mangement Local managed unit
receives status updated from
remote unit
receives status updated from
remote unit
4
Remote Loopback assists in identifying net-
work problems
work problems
4
Bandwidth Control Independent ingress rate
limiting on both ports
Features
4
Auto-Negotiation
4
AutoCross™ [
4
Far-End-Fault (FEF)
4
Transparent Link Pass Through
4
Bandwidth Allocation
4
Loopback
4
Last Gasp
4
Remote Management
4
Automatic Link Restoration
4
Link Test
4
Field Upgradeable Firmware
Remote Status Reporting Conversion
see also:
10/100BASE-TX to 100BASE-FX Remotely Managed Stand-Alone NIDs
10/100BASE-TX to 100BASE-FX with Remote Management