Intel S1400SP4 DBS1400SP4 User Manual
Product codes
DBS1400SP4
Intel® Server Board S1400SP TPS
Jumper Blocks
Revision 1.0
Intel order number G64248-001
91
9. Jumper Blocks
The server board has several 3-pin jumper blocks that can be used to configure, protect, or
recover specific features of the server boards.
recover specific features of the server boards.
The following symbol identifies Pin 1 on each jumper block on the silkscreen:
▼
Figure 23. Jumper Blocks
Note:
1. For safety purposes, the power cord should be disconnected from a system before
removing any system components or moving any of the on-board jumper blocks.
2. System Update and Recovery files are included in the System Update Packages (SUP)
posted to Intel
®
’s website.
Table 48. Server Board Jumpers
Jumper Name
Pins
System Results
J2H5: BMC
Force Update
Force Update
1-2
BMC Firmware Force Update Mode – Disabled (Default)
2-3
BMC Firmware Force Update Mode – Enabled
J2H7: BIOS
Recovery
Recovery
1-2
Pins 1-2 should be jumpered for normal system operation. (Default)
2-3
The main system BIOS does not boot with pins 2-3 jumpered. The system only boots from
EFI-bootable recovery media with a recovery BIOS image present.
EFI-bootable recovery media with a recovery BIOS image present.
J2H4: BIOS
1-2
These pins should have a jumper in place for normal system operation. (Default)