Intel S1400SP4 DBS1400SP4 User Manual
Product codes
DBS1400SP4
Intel® Server Board S1400SP TPS
Functional Architecture
Revision 1.0
Intel order number G64248-001
27
Figure 18. Server Board Layout - I/O Module Connector
Supported I/O modules include:
Table 5. Supported Intel
®
I/O Module Options
Descritpion
Intel
®
Product Code
4-port 1Gb Ethernet Networking IO Module
AXX4P1GBPWLIOM
2-port 10Gb Ethernet Networking IO Module
AXX10GBTWLIOM
2-port 10Gb Ethernet SFP IO Module
AXX10GBNIAIOM
FDR InfiniBand* IO Module
AXX1FDRIOIOM
3.2.3.3
SAS Module
To broaden the standard on-board feature set, the server board provides support for one of
several available SAS RAID IO Module options. The SAS module is attached to a mezzanine
connector on the server board (J4J1) labeled SAS_Module and is supported by x4 PCIe Gen3
signals from the IIO module of the CPU processor.
several available SAS RAID IO Module options. The SAS module is attached to a mezzanine
connector on the server board (J4J1) labeled SAS_Module and is supported by x4 PCIe Gen3
signals from the IIO module of the CPU processor.
3.2.3.4
Network Interface
Network connectivity is provided by means of one onboard Intel
®
Ethernet Controller I350
providing up to four 10/100/1000 Mb Ethernet ports. The NIC chip is supported by implementing
x2 PCIe Gen2 signals from the Intel
x2 PCIe Gen2 signals from the Intel
®
C600 PCH.
On the Intel
®
Server Board S1400SP, two for S1400SP2 and four for S1400SP4 external
10/100/1000 Mb RJ45 Ethernet ports are provided. Each Ethernet port drives two LEDs located
on each network interface connector. The LED at the right of the connector is the link/activity
LED and indicates network connection when on, and transmit/receive activity when blinking.
The LED at the left of the connector indicates link speed as defined in the following table:
on each network interface connector. The LED at the right of the connector is the link/activity
LED and indicates network connection when on, and transmit/receive activity when blinking.
The LED at the left of the connector indicates link speed as defined in the following table: