HP 701977-031 User Manual

The network cable is included in the Cable Kit, spare part number 652545-001.

Before removing the network cable, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the service access cover (see 

Remove the optical drive (see 

) or upgrade bay hard drive (see 

).

Remove the keyboard (see 

Remove the top cover (see 

).

Remove the display assembly (see 

).

Remove the fan/graphics board heat sink (see 

Remove the processor heat sink (see 

Remove the network cable:

Remove the network cable from the sideband on the base enclosure.

Reverse this procedure to install the network cable.

The power connector cable is included in the Cable Kit, spare part number 652545-001.

Component replacement procedures 107