Gamber-Johnson 7160-0427 Leaflet

Page of 1
Placement
Motion Attachment  
Included
Tilt
Rotates
Weight
Height
Width
Depth
Any 
Upper Tube, Complete Pole, Low Profi le 
Brackets, Center Pole 
or directly to any fl at surface
No
No
Entire arm - 360° can 
lock at every 15°
5.2 lbs
4.0”
4.0”
12.0”
Features:
•  Patent Pending design
•  The entire arm can rotate around 360° with locking points at every 15°
•  To rotate the arm simply pull the front lever out, rotate to desired position and then release the lever
•  Locking slide arm can telescope 9” to 13” from the center of the pole and utilizes the industry first, Slam and Lock 
technology, that allows you to simply push the computer back to the retracted position and it automatically locks 
into place
•  Heavy duty, spring loaded steel, side pin was tested to 50,000+ cycles
•  Designed for use with the Gamber-Johnson Standard Motion Attachments with a 3/8” hole (sold separately)
•  Can be mounted directly to a flat surface or on any 
Upper Tube, Complete Pole, Center Pole
 or 
Low Profile Bracket
•  Heavy gauge steel construction for long-term durability
•  Black powdercoat fi nish for maximum corrosion resistance
D
W
H
Item No. 
7160-0427
3001 Borham Ave.  |  Stevens Point, WI  54481, USA
Phone: 715.344-3482  |  Toll-free: 800.487-9220  |  Fax: 715.344-5209
Email: gamberj@gamberjohnson.com | Website: www.gamberjohnson.com
This  document, including images, may not be reproduced partly or fully without the expressed written 
consent of Gamber-Johnson’s Marketing Department. © Copyright  2012 Gamber-Johnson LLC
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
MONGOOSE
MONGOOSE™
™ - 9” LOCKING SLIDE ARM WITH 3/8” STUD
 - 9” LOCKING SLIDE ARM WITH 3/8” STUD
NEW