Gigaset DX800A S30853-H3100-D201 User Manual

Gigaset DX800A all in one / IM-NORD EN / A31008-N3100-R201-2-SM19 / HS_and_other_Devices.fm / 18.04.11

V

e

rsion 4, 16.0

9

.2005

You can connect an ITU-T Group 3 fax 
machine to the base via the FAX port. 

1. Insert one end of the fax connection ca-

ble from the rear into the recess in the 
housing.

2. Plug the jack into the fax port on the base 

(labelled: FAX).

3. Connect the fax connection cable to the 

port on the fax machine.

You do not explicitly have to register the fax 
machine to the base. It is automatically "reg-
istered", once you activate the FAX port on 
the base (

, default setting is 

"off"). 

Once the FAX port is switched on, the fax 
machine is added to the list of internal par-
ties with the internal name INT 8. 

The fax machine is assigned all of the base's 
ISDN numbers as receive connections. 
The first number from the configuration is 
assigned as a send connection. You can 
change the assignment 

.

When connecting a multifunction device 
(fax/phone) to the FAX port, you must 
observe the following:

u

There is no ringing tone when you 
pick up. 

u

CLIP 

 is not supported 

for incoming calls. 

u

If the answering machine takes a call 
on the device's receive connection, it 
continues to ring. 

u

If the device's receive connection is 
assigned neither to the base nor a 
handset, calls are not transferred to 
the call lists. 

u

Internal functions such as "internal 
consultation call during an external 
call" or "internal transfer" are not sup-
ported. 

If a number is only assigned to the fax 
machine as a receive connection, then 
calls to this number will not be entered in 
the call lists (it is not possible to read the 
entries from the base or a handset).