Gigaset DX800A S30853-H3100-D201 User Manual

Gigaset DX800A all in one / IM-NORD EN / A31008-N3100-R201-2-SM19 / settings.fm / 18.04.11

V

e

rsion 4, 16.0

9

.2005

Your base will check daily whether a newer 
firmware version is available from the Inter-
net on the configuration server. If firmware 
updates are available, the message New 
firmware available. Update? is displayed in 
the idle display of the base. 

Press the display key to confirm 
the prompt. 

The firmware is loaded onto your base. 

If you answer the prompt with 

, the base 

returns to idle status. Your base will no 
longer remind you that firmware updates 
are available. The message will only be 
shown again if a newer version of the 
firmware is available to download. You can 
also carry out the firmware update manually 

You can deactivate the automatic version 
check via the Web configurator. 

You can increase the range and signal 
strength of your base using a repeater. You 
will need to activate repeater mode. This will 
terminate any calls that are in progress at the 
time.

Prerequisite: Eco mode(+) is deactivated.
v 

¢

Ï 

¢

¢

Press the display key to activate 
or deactivate repeater mode 
(

³= on).

Press the display key to confirm 
the prompt.

If you deactivate the DECT interface, the 
radio connection between the base and the 
registered handsets/repeaters is terminated. 
Handsets/repeaters are "asynchronous" to 
the base. They cannot establish a connec-
tion with the base and no calls are signalled. 
Handsets/repeaters do remain registered to 
the base and will synchronise with the base 
as soon as you reactivate the DECT interface. 
v 

¢

ÏSettings 

¢

¢

 

Press the display key to activate/
deactivate the DECT interface 
(

³= activated). 

If there are no handsets or repeaters regis-
tered to the base, the base's DECT interface 
is automatically deactivated. 
If you switch the base to registration mode 

 to reregister handsets/

repeaters, the DECT interface is automati-
cally reactivated. 

If the base is not connected to the Inter-
net at the time when the check for new 
firmware is to be carried out (e.g., 
because the router is deactivated), the 
check is carried out as soon as the base is 
reconnected to the Internet. 

u

Repeater support and Eco Mode / 
Eco Mode+ 

 cancel 

each other out, i.e., both functions 
cannot be used at the same time.

u

The default encrypted transmission 
setting is deactivated when repeater 
mode is activated.