Gigaset DX800A S30853-H3100-D201 User Manual
Product codes
S30853-H3100-D201
65
Making calls using network services
Gigaset DX800A all in one / IM-NORD EN / A31008-N3100-R201-2-SM19 / netservices.fm / 18.04.11
V
e
rsion 4, 16.0
9
.2005
Identifying nuisance callers –
identify caller function (ISDN)
identify caller function (ISDN)
Identify caller is used to identify annoying or
threatening callers.
threatening callers.
Prerequisites:
u
You have requested the identify caller
function from your ISDN network pro-
vider.
function from your ISDN network pro-
vider.
u
You are conducting an external call via an
ISDN connection.
ISDN connection.
Activate this function during the call or
immediately after the caller has hung up.
You must not end the call yourself i.e., you
must not replace the receiver!
immediately after the caller has hung up.
You must not end the call yourself i.e., you
must not replace the receiver!
This does not affect any other call that is
being made at the same time.
being made at the same time.
The caller is identified in the ISDN telephone
exchange and is recorded by phone number,
time and date. A printout of the list is then
sent by your network provider through the
post.
exchange and is recorded by phone number,
time and date. A printout of the list is then
sent by your network provider through the
post.
Prerequisite: You are conducting an exter-
nal call or the external call participant has
hung up; however, you are maintaining the
connection.
nal call or the external call participant has
hung up; however, you are maintaining the
connection.
§Options§
¢
Identify Caller
You can then continue the call or replace the
receiver.
receiver.
Functions after a call
Cancelling ringback
Prerequisite: Ringback is activated for your
fixed line or ISDN connection
fixed line or ISDN connection
.
v
¢
Ç Select Services
¢
Ringback Off
The telephone is connected to the
analogue fixed line:
analogue fixed line:
A connection is established to the exchange
and a code sent.
and a code sent.
¤
After confirmation from the telephone
network, press the red end key
network, press the red end key
T
.
The telephone is connected to the
ISDN network:
ISDN network:
The phone number activated for ringback is
shown in the display.
shown in the display.
¤
Press the display key
§Delete§
to deactivate
ringback.
Ringback disabled is displayed on the
screen.
screen.
Please note
If the ringback was signalled before
you could cancel it, you can end it
using
you could cancel it, you can end it
using
§Cancel§
.