Dynamode PCMCIA 56K Modem LM560CA Leaflet

PCMCIA 2.1/JEIDA 4.1 compliant. 

Internal DAA with standard 15pin 
detachable interface connector plus Rj11 
cable for direct connection to the 
telephone wall outlet.

Low power consumption and automatic 
sleep mode to extend PC battery life. 
Advanced Microsoft Plug and Play 
technology to run with Windows 
95/98/ME/2000/XP. 

Support industry and ITUT standard error 
correction and data compression 
protocols. 

Windows NT 4.x, Windows 95, OSR2, 
Windows 98, Windows ME, Windows 
2000, and Windows XP support. 

Modem Operating Protocol 
 

V.90/K56flex (up to 56,000 bps, download) 
V.34bis (up to 33,600 bps) 
V.34 (up to 28,800 bps) 
V.32bis (up to 14,400 bps) 
V.32 (9,600/4,800 bps) 
V.22bis (2,400 bps) 
V.23 (1,200 TX/75RX bps) 
V.22/Bell 212A (1,200 bps) 
V.21/Bell 103 (300 bps) 

Error Correction Protocol  
 

V.42 and MNP Class 2 to 4 

Data Compression Protocol 

 

V.42bis and MNP Class 5 
 

Fax Compatibility 
 

 

EIA Class 1 fax commands 
Group 3 send and receive 
ITU-T V.17, up to 14,400 bps 
ITU-T V.29, up to 9,600 bps 
ITU-T V.27ter, up to 4,800 bps 
ITU-T V.21 Channel 2 up to 300 bps  
 

Operating Modes  
 

 

Asynchronous full duplex 
Manual/Automatic answer 
 

Flow Control 
 
 

 

Hardware CTS/RTS 
Software XON/XOFF 

 

Receive Sensitivity 
 
 

 

- 40 dBm  

 

Transmit Level 
 
 
 

 

Permissive -11+/-1 dBm   

 

Line Interface 
 
 
 
 

 

RJ11, 2wire dial up 
  

 

Diagnostic 
 
 
 
 

 

Powerup selftest 
Local analog loopback test 
Local digital loopback test 
Remote digital loopback test 
 
  

 

Dialing capability 

 
 
 
 

 

DTMF tone and rotary pulse 

 
  

 

Application Program 
Interface 
 

 
 
 
 

 

Hayes compatible AT command set 
 

 
  

 

Call Progress Monitoring 
 

 
 
 
 

 

Dial tone, busy tone and ringback detection  
 

 
  

 

Dimension 

85.6mm (L) X 54mm (W) X 5mm (H) Comply with 
PCMCIA Type II