IMC Networks iMcV-VDSL-LANextender/CPE Module 851-14102 Leaflet

• Operates over existing telephone twisted pair

cabling

• IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX
• 10Base-S
• QAM 

(Quadrature Amplitude Modulation)

line coding

• Asymmetric/symmetric data rates
• Bandwidth limiting of data rate
• IEEE 802.3x Flow Control
• Auto-Negotiation of speed and duplex (HDX/FDX)

on Ethernet port

• Includes Link Fault Propagate 
• Supports packets up to 1536 bytes
• Installs in any iMediaChassis, iMediaCenter or

MediaChassis

• Supports GUI-Based iView² 
• 

RJ-45 and RJ-11

• Includes diagnostic LEDs
• Include hot-swappable architecture

· FCC Class A

· UL/cUL, CSA, CE

32° to 122°F (0° to +50°C)

-13° to 158°F (-25° to +70°C)

5% to 90% (non-condensing), 

0 – 10,000 ft. altitude

Always deploy iMcV-VDSL-LANextender products in pairs, using one CO module and one CPE module. 

iMcV-VDSL-LANextender/CO Module [200m - 2Km]

iMcV-VDSL-LANextender/CPE Module [200m - 2Km]

For ordering information/technical specifications on iMediaChassis and iMediaCenter chassis, go to

Copyright © 2006 IMC Networks.  All rights
reserved.  The information in this document is
subject to change without notice.  IMC Networks
assumes no responsibility for any errors that may
appear in this document.  Specific product names
may be trademarks or registered trademarks and
are the property of their respective companies.

Fiber Consulting Services
For information call: 
TEL: 949-465-3000 
1-800-624-1070 

(US/CAN) 

+32-16-550880 

(Europe)

fcs@imcnetworks.com 

Headquarters
19772 Pauling 
Foothill Ranch, CA 92610
TEL: 949-465-3000 
FAX: 949-465-3020 
sales@imcnetworks.com 
www.imcnetworks.com

Europe
Herseltsesteenweg 268 
B-3200 Aarschot | Belgium 
TEL: +32-16-550880
FAX: +32-16-550888 
eurosales@imcnetworks.com 

Eastern US/Latin America
18840 US Hwy. 19 North Suite 400
Clearwater, FL 33764
TEL: 727-524-8152/524-8071 

(Latin)

FAX: 727-524-8432
latinsales@imcnetworks.com

Easily configure and manage iMcV-VDSL with the GUI-based iView²: 
As an SNMP management application, iView² gives network managers the ability to moni-
tor and control IMC Networks' products.  
iView² runs standalone on Windows NT/XP/2000, as a standalone Java Application for
other operating systems, as a snap-in module for HP OpenView, as a Web Server running
under IIS or as a Java Web Servlet. For assistance in selecting the right version of iView²,
visit: 

NOTE: Features and functionality are configurable via the software and/or hardware DIP switch settings.

The iMcV Series includes 10 Mbps (iMcV-PIM), 100 Mbps (iMcV-LIM), autosensing 10/100 Mbps (iMcV-LIM 10/100),  155 Mbps ATM (iMcV-ATM) and Gigabit
Ethernet (iMcV-Gigabit) copper-to-fiber media conversion modules as well as 10/100 and 10/100/1000 switching media converters (MediaLinX series).  T1/E1/J1
media converters (iMcV-T1/E1/J1), DS3/E3 media converters (iMcV-DS3/E3) and VDSL to Ethernet media covnerters (iMcV-VDSL-LANextender) are also avail-
able.  In addition, IMC Networks has the most extensive line of protocol-independent (iMcV-S2MMs, iMcV-S2SMs and iMcV-M2MMs) fiber mode conversion mod-
ules.  The iMcV series also includes: iMcV-FiberLinX, iMcV-WDM and iMcV-FiberWay modules.  Single-strand fiber versions are also available. 

For more information on the various products in the iMcV Series, refer to: http://www.imcnetworks.com/prod-dir.asp 

The data rate (the sum of the Upstream and Downstream data rates) of the

10Base-S VDSL port is fixed by the distance of the application.  If an application, for exam-
ple, requires 1.5 Km, a maximum of 15 Mbps can be distributed between the Upstream
and Downstream data rates.  Bandwidth can be limited, via management, and various dis-
tances can have Synchronous or Asynchronous data rates.  With
Synchronous data rates, 7.5 Mbps is configured for the
Upstream and 7.5 Mbps for Downstream.  Otherwise, speeds
can be distributed in any combination between the Upstream
and Downstream rates, making data rates Asynchronous (12.5
Mbps and 2.1; 5 Mbps and 10 Mbps, etc). 

NOTE: Distances and speeds are approximate; actual distances depend on wiring quality and gauge.  

The distances are less than or equal to the values listed. 

NOTE: The actual Ethernet speeds are lower than the speeds listed above due to VDSL overhead (10% overhead).

Distance

Data  Rate  Type

Upstream  

Data  Rate*

Downstream  

Data  Rate*

Approx.  Total  

of  Data  Rates*

500 m 

Symmetric

12.5 Mbps

12.5 Mbps

25 Mbps

1.5 Km

Asymmetric

2.1 Mbps

12.5 Mbps

15 Mbps

2 Km

Asymmetric

2.1 Mbps

4.25 Mbps

6.5 Mbps

* 24 AWG

No FEXT

Products that are RoHS compliant contain an “8” at the beginning of the part number, making is eight digits long. When ordering the RoHS version of a product, add an “8” to the
front of the standard part number, eg. 56-10730 becomes 856-10730. Call for RoHS product availability.