IMC Networks McGigabit, TX/SX-MM850-SC 55-12670 Leaflet

Your network is growing and many new access points, workstations, etc. are required.
However, legacy equipment, along with your existing wiring infrastructure, must work
with any new equipment you implement in your network.  When copper-to-fiber, cop-
per-to-coax or fiber-to-fiber conversions are required, along with advanced trou-
bleshooting features, our MediaConverter Series is the perfect solution. 

IMC Networks’ MediaConverter Series enables you to easily and cost-effectively con-
nect one type of media to other dissimilar media or networking products. This series
increases the functionality and extends the productive life of both your legacy cabling
infrastructure and networking equipment when adding fiber to your network.

Media Converter Chassis:
• 1, 4, 8 and 12-slot varieties
Media Converter Modules:
McPIM:
• One 10 Mbps twisted pair port with an RJ-45 connector
• One 10 Mbps fiber port with ST, SC or MT-RJ connector(s)
McPIM TP/BNC:
• One 10 Mbps twisted pair port with an RJ-45 connector
• One 10 Mbps thin coaxial port with BNC connector
McLIM:
• One 100 twisted pair port with an RJ-45 connector
• One 100 Mbps fiber port with ST, SC or MT-RJ connector(s)
Switching McLIM TP-TX/FX:
• One 10/100 twisted pair port with an RJ-45 connector
• One 100 Mbps fiber port with ST or SC connector(s)
• Plug-and-play operation
McGigabit:
• One 1000 Mbps twisted pair port with an RJ-45 connector
• One 1000 Mbps fiber port with SC connector(s). 
• Plug-and-play operation

Install modules in any combination in any MediaConverter chassis. If the number of
required conversions is high but rackmount space is limited, choose the 1U high 12-
slot chassis.  McPIMs and McLIMs (TX/FX and TX/SX)  include troubleshooting features
such as LinkLoss and  FiberAlert that make isolating fiber breaks easier should they
occur.    McPIM TP/BNC includes switch-selectable termination on BNC ports.  

•

Supports Ethernet, Fast Ethernet, and

Gigabit Ethernet, and up to OC-3 for
mode converters 

•

Available for multi-mode or single-

mode fiber with ST, SC or MT-RJ
fiber connectors

•

Supports very long fiber distances

•

Table-top or rackmountable

•

1-, 4-, 8- and 12-slot chassis

•

12-slot chassis is only 1U high 

•

AC or DC power on 12-slot chassis

•

Modular, hot-swappable architecture

reduces operational costs associated
with product installation, upgrades
and maintenance

•

LinkLoss and FiberAlert features

assist in diagnosing problems on fiber
optic networks