Transition Networks SISTF1013-211-LRT Leaflet
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
IEEE Std. 802.3, 802.3u, 802.3x
Status LEDs
PWR (Power): ON = Unit has power connected
PWR 1 (Power): ON = primary power connected
PWR 2 (Power): ON = backup power connected
Fault: ON = Power failure or port link failure
LNK/ACT (Ports 1 – 2): ON = Link;
Flashing = data transmitting
HDX/FDX (Ports 1 – 2):
ON = Full duplex mode
10/100 (UTP): ON = 100 Mbps
PWR 1 (Power): ON = primary power connected
PWR 2 (Power): ON = backup power connected
Fault: ON = Power failure or port link failure
LNK/ACT (Ports 1 – 2): ON = Link;
Flashing = data transmitting
HDX/FDX (Ports 1 – 2):
ON = Full duplex mode
10/100 (UTP): ON = 100 Mbps
Dip Switches
1: Enable/Disable Port Alarms
2: Enable/Disable Link Pass Through
3: Full/Half Duplex 100BASE-FX
4: Converter/Switch Mode
2: Enable/Disable Link Pass Through
3: Full/Half Duplex 100BASE-FX
4: Converter/Switch Mode
Dimensions
Width: 1.2" [30 mm]
Depth: 3.7" [95 mm]
Height: 5.5" [140 mm]
Depth: 3.7" [95 mm]
Height: 5.5" [140 mm]
Ingress Protection
IP 30
Input Power
12 to 48 VDC, 0.2A-0.7A, redundant inputs with
reverse polarity protection; Additional barrel
connector; SISTF1011-211-LRT also supports
24 VAC (18~30 VAC)
reverse polarity protection; Additional barrel
connector; SISTF1011-211-LRT also supports
24 VAC (18~30 VAC)
Power Consumption
4.6 Watts
Environment
-40 to +75°C Ext. operating temp.
5 – 95% humidity non-condensing
0 – 10,000 ft. altitude
-40 to +85°C storage temp.
5 – 95% humidity non-condensing
0 – 10,000 ft. altitude
-40 to +85°C storage temp.
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; UL508; CSA C22.2 no 60950
UL Class 1 Div 2 for hazardous environments
UL Class 1 Div 2 for hazardous environments
EMI Compliance
CISPR/EN55022 Class A; FCC Class A; CE Mark;
EN61000-4-2; EN61000-4-3; EN61000-4-4;
EN61000-4-5; EN61000-4-6
EN61000-4-2; EN61000-4-3; EN61000-4-4;
EN61000-4-5; EN61000-4-6
Environmental Compliance
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Warranty
Lifetime
Ordering Information
Extended Operating Temperature
-40°C to +75°C
-40°C to +75°C
SISTF1013-211-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SISTF1014-211-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
SISTF1011-211-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Optional Accessories
(sold separately)
External AC/DC Power Supply
SPS-UA12DHT
(100-240 VDC input
0°C to +70°C operating temperature)
0°C to +70°C operating temperature)
25083
Universal AC/DC Input DIN Rail Mountable
+12 VDC Power Supply
Transition Networks’ Industrial Media
Converters are hardened devices de-
signed to reliably operate in harsh en-
vironments such as those found on
factory floors, outdoor enclosures or
other hazardous environments.
Converters are hardened devices de-
signed to reliably operate in harsh en-
vironments such as those found on
factory floors, outdoor enclosures or
other hazardous environments.
Eliminate EMI and RFI issues or over-
come distance limitations with cop-
per based cabling by using the
Industrial Media Converter to convert
your copper based equipment over to
fiber optics. The media converter can
connect to either 10Base-T or
100Base-TX ports and provides a
100Base-FX fiber optic connection for
links up to 20 km.
come distance limitations with cop-
per based cabling by using the
Industrial Media Converter to convert
your copper based equipment over to
fiber optics. The media converter can
connect to either 10Base-T or
100Base-TX ports and provides a
100Base-FX fiber optic connection for
links up to 20 km.
Features
Auto-Negotiation
AutoCross™
Link Pass Through
DIN Rail Mounting and Wall
Mount Brackets Included
Extended (-40°C to 75°C)
operating temperature
Dry Contact Relay Alarm Output
Dual Auto-Sensing Redundant DC
Power Inputs
Media Converter Mode or Switch
Converter Mode
Barrel connector interface cable
included for connecting external
AC/DC power supply
Class 1 Div 2
SISTF101x-211-LRT
stand-alone industrial media converter
Class 1 Div 2 Industrial Media Converter
10/100BASE-TX to 100BASE-FX
Industrial
Industrial Media Converter